Hi, I just flashed a firmware image to a "XM25QH64C" which is labeled
experimental, the flash was successful with default options on a ch341a_spi
clone, here is the log. Sorry I couldn't get the debug output. Reading and
writing worked just fine. Thanks a lot for maintaining this awesome software!
I used the git master branch version as of today.
[sadoon@sforza Firmware]$ sudo ~/.local/src/flashrom/flashrom -p ch341a_spi -w
Alder_Clean_Bit.bin
flashrom v1.2-1215-gfc533e25 on Linux 6.1.12-gentoo-ppc64le (ppc64le)
flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found XMC flash chip "XM25QH64C" (8192 kB, SPI) on ch341a_spi.
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE WP
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash chip. Please include the flashrom log
file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.
_______________________________________________
flashrom mailing list -- flashrom@flashrom.org
To unsubscribe send an email to flashrom-le...@flashrom.org
