Hello, I've compiled the coreboot and was trying to burn it to my flash. Now this happens: user@samsung-freebsd:~/Belgeler/coreboot 8mb h61 $ sudo flashrom --noverify-all --ifd -i bios -p internal -w coreboot.rom -c "W25Q64JV-.Q" Password: flashrom v1.3.0 on FreeBSD 14.3-RELEASE (amd64) flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 4, resolution: 1ns). Found chipset "Intel H61". Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting BIOS Control at 0xdc from 0x2a to 0x09 failed. New value is 0x2a. SPI Configuration is locked down. FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. FREG1: BIOS region (0x00180000-0x007fffff) is read-write. FREG2: Management Engine region (0x00001000-0x0017ffff) is read-write. OK. Found Winbond flash chip "W25Q64JV-.Q" (8192 kB, SPI) mapped at physical address 0x00000000ff800000. === This flash part has status UNTESTED for operations: WP The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading ich descriptor... done. Using region: "bios". Reading old flash chip contents... done. Erasing and writing flash chip... Transaction error! spi_write_cmd failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. spi_write_cmd failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. spi_write_cmd failed during command execution at address 0x180000 Reading current flash chip contents... done. Looking for another erase function. spi_simple_write_cmd failed during command execution Reading current flash chip contents... done. Looking for another erase function. spi_simple_write_cmd failed during command execution Reading current flash chip contents... done. Looking for another erase function. Looking for another erase function. Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Your flash chip is in an unknown state. Get help on IRC (see https://www.flashrom.org/Contact) or mail flashrom@flashrom.org with the subject "FAILED: <your board name>"!------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF!
_______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
