Hello, I followed the github skulls tutorial to update in the terminal my corebooted T440p and it failed, and it says DO NOT REBOOT. What should I do ?
It was this tutorial : https://github.com/merge/skulls/blob/master/t440p/README.md#updating Here is the copy of my terminal : sudo ./skulls.sh -b t440p 1) ./t440p_coreboot_seabios_4931b978d9_top.rom 2) Quit file not specified. Please select a file to flash. Please read the README for details about the differences: 1 t440p_coreboot_seabios_4931b978d9_top.rom: OK Flash the BIOS now? y/N: y flashrom v1.2 on Linux 6.16.3-76061603-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Using region: "bios". Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Cannot open file stream for /dev/mtd0 Found chipset "Intel QM87". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to [email protected] including a verbose (-V) log. Thank you! Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x09 failed. New value is 0x2b. SPI Configuration is locked down. FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only. FREG2: Management Engine region (0x00003000-0x004fffff) is locked. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see https://flashrom.org/ME for details. PR1: Warning: 0x00b40000-0x00bfffff is read-only. PR2: Warning: 0x00ab1000-0x00adffff is read-only. PR3: Warning: 0x00ab0000-0x00ab0fff is read-only. PR4: Warning: 0x00800000-0x00aaffff is read-only. At least some flash regions are read protected. You have to use a flash layout and include only accessible regions. For write operations, you'll additionally need the --noverify-all switch. See manpage for more details. Enabling hardware sequencing due to multiple flash chips detected. OK. Found Programmer flash chip "Opaque flash chip" (12288 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Reading old flash chip contents... done. Erasing and writing flash chip... Transaction error between offset 0x00800000 and 0x00800fff (= 0x00800000 + 4095)! Reading current flash chip contents... done. Looking for another erase function. Looking for another erase function. Looking for another erase function. Looking for another erase function. Looking for another erase function. Looking for another erase function. Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail [email protected] with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF!
_______________________________________________ flashrom mailing list -- [email protected] To unsubscribe send an email to [email protected]
