Stelios Bounanos wrote: >>>>>> On Mon, 10 Aug 2009 14:03:09 -0700, Brian Lloyd <brian-wb6rqn at >>>>>> lloyd.com> said: >>>>>> > > >> On Mon, Aug 10, 2009 at 1:53 PM, Stelios Bounanos<m0gld at enotty.net> wrote: >> >>>>>>>> On Mon, 10 Aug 2009 22:06:07 +0200, Erik Jakobsen <eja at urbakken.dk> >>>>>>>> said: >>>>>>>> >>>> Stelios Bounanos wrote: >>>> >>>>> Please start fldigi with --debug-level 9 and post the log output. The >>>>> sound card information will tell us how many channels are supported in >>>>> each direction. >>>>> >>>> It is here: >>>> >>> [...] >>> >>> That input device looks like an output device to me :) >>> >>> Let's take a closer look at those virtual cable devices. Please run the >>> program below and send me the output file (pa_devs_out.txt) that it >>> generates. >>> >>> http://download2.berlios.de/pub/fldigi/alpha/pa_devs.exe >>> > > >> I have run into this problem with PowerSDR, VAC, and fldigi before. I >> have solved it by switching fldigi from portaudio to file I/O and >> back. I have also had to match the sample rate manually, i.e. manually >> set the sample rate in fldigi to 48000 to match the sample rate set in >> PowerSDR. If I do those two things, everything seems to work fine. I >> suspect an interaction problem with VAC. Setting everything manually >> seems to make it work just fine. >> > > Thanks Brian, this may help Erik with his setup. > > > Brain, Stelios.
I tried what you have told Brian -thanks for your input here. I did set the sample rates for capture as well as for copy. ok ? I'm a bit in doubt on the sequence of changing the portaudio to file I/O, and back again ?. If I change to file I/O, and stop/start Fldigi, Fldigi starts up without errors. Being in Fldigi and switch back to portaudio, the log again opens and show the portaudio erros again. I have put some screenshots here: http://picpaste.com/sdr.jpg http://picpaste.com/samples.jpg http://picpaste.com/portaudiotofileioandback.jpg 73s-Erik-OZ4KK
