VFO switching does work on the latest version.
I suspect I was switching between the same frequency.
Now I have a different frequency selected I can see that the 2 VFO'2 are
virtual to the radio as it stays on VFOa but does switch frequency as
per flrig.
Roger
On Sun, 2009-11-08 at 18:11 +0000, Roger Beever wrote:
> OK as long as that is the expected action that's fine.
> I will try and capture the levels if I can.
> Roger
> On Sun, 2009-11-08 at 11:55 -0600, Rich Newsom wrote:
> > I have brought this up to Dave a few times with this version and
> > previous versions. He has not coded the TX Pwr or S-meter functions for
> > the 857 & 897 series radios. The big problem is the Tx power is totally
> > off depending on the band. It works more as a 'relative power'
> > indication than any type of power meter. Maybe Dave will find time to
> > work on it, sooner or later. You could make a chart of the S-level and
> > the corresponding value (hex) from the log and send it to Dave as that
> > is what he needs to do the code for this function. Same for power out
> > metering.
> >
> > Rich
> > WA4SXZ
> >
> >
> > Roger Beever wrote:
> > > Hi.
> > > Having got the FT-857 in the house from the camper I thought I would try
> > > flrig as the Ft is one of the listed radios.
> > > The S mete shows on the GUI but no level is seen even on a local AM
> > > broadcast station.
> > > the vfo swap does not seem to be working either there is a click as if
> > > it switched and then straight back.
> > >
> > > Log extract below.
> > > I was using it in standalone mode (I assume the E: is an attempt to talk
> > > to fldigi) and the baud rate was 38400 as I had been trying to software
> > > wideband it as I have a 5 MHz NoV.
> > > The latest FT-857D does not respond to software widebanding but it does
> > > coeme set to do 40m up to 7.2 MHz out of the box.
> > > Out of the box is more or less what the radio is as I have not used it
> > > much yet
> > >
> > > W: main: flrig log started on Sun Nov 8 16:51:58 2009
> > >
> > > E: init_xmlrpc: xmlrpc queries disabled
> > > Unable to transport XML to server and get XML response back. Curl
> > > failed to perform HTTP POST request. curl_easy_perform() says: couldn't
> > > connect to host
> > > W: initStatusConfigDialog: Aux port not selected
> > > D: sendCommand: sent 00 00 00 00 E7
> > > D: sendCommand: reply 0A
> > > I: get_smeter: 0A => 1
> > > D: sendCommand: sent 00 00 00 00 03
> > > D: sendCommand: reply 00 01 98 00 04
> > > D: sendCommand: sent 00 00 00 00 E7
> > > D: sendCommand: reply 0A
> > > I: get_smeter: 0A => 1
> > > D: sendCommand: sent 00 00 00 00 03
> > > D: sendCommand: reply 00 01 98 00 04
> > > D: sendCommand: sent 00 00 00 00 E7
> > > D: sendCommand: reply 0A
> > > I: get_smeter: 0A => 1
> > > D: sendCommand: sent 00 00 00 00 03
> > > D: sendCommand: reply 00 01 98 00 04
> > > D: sendCommand: sent 00 00 00 00 E7
> > > I: get_smeter: 0A => 1
> > > I: get_smeter: 0A => 1
> > > I: get_smeter: 0B => 1
> > > I: get_smeter: 0A => 1
> > > I: get_smeter: 0A => 1
> > > I: get_smeter: 0A => 1
> > > I: get_smeter: 0A => 1
> > >
> > > Version is 0.9.956 but the previous version I was using is the same.
> > > 73 Roger G6CKR
> > >
> > > _______________________________________________
> > > fldigi-alpha mailing list
> > > fldigi-alpha at lists.berlios.de
> > > https://lists.berlios.de/mailman/listinfo/fldigi-alpha
> > > ------------------------------------------------------------------------
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 9.0.698 / Virus Database: 270.14.55/2489 - Release Date:
> > > 11/08/09 01:37:00
> > >
> > >
> >
>
>
>
> _______________________________________________
> fldigi-alpha mailing list
> fldigi-alpha at lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/fldigi-alpha
