Test Machine: (I'll only send this once for reference) Manufacturer Shuttle Model SX38 Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz 64 bit, with 8GB RAM. Display adapter type NVIDIA GeForce 9500 GT Total available graphics memory 4095 MB Dedicated graphics memory 1024 MB Dedicated system memory 0 MB Shared system memory 3071 MB Display adapter driver version 8.16.11.9107 Primary monitor resolution 1680x1050 DirectX version DirectX 10 Serial ports: Prolific 2303 Sound Card: Realtek High Definition Audio on the motherboard.
Operating System: Windows 7 x64 Enterprise Programs being tested: fldigi 3.13BG and flrig 0.9.97 I also run Windows XP and Ubuntu Linux 9.10 in VMWARE virtual machines. Both virtual machines have 1024MB of memory. The interface is a RigBlaster Pro interfaced to an ICOM 7000. --------------------------------------------------------------------------------------------------------- In Windows 7 the only problem I have is when I set up the ptt in flrig then fldigi can not activate the ptt. I can set up the ptt in fldigi and turn it off in flrig and it works fine but then the ptt button in flrig does not work. I was able to change frequency at the rig, in flrig or in fldigi, and it showed correctly in all three spots. In WinXP there was a problem communicating the frequency to the rig. Changes in flrig showed in fldigi and fldigi changes showed in flrig. Neither showed up at the rig. The same problem appeared in Ubuntu linux. Since both of them run in as a virtual machine I will try to find another machine to try it on to make sure it isn't a VM problem. However I run HRD/DM780 and the DXLAB suite in the VM without a problem. Ed -- Ed Brown W2ER _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
