>>>>> On Sun, 27 Dec 2009 09:49:22 +0100, Erik Jakobsen <[email protected]> said:
[snip pa_devs_out.txt] It seems that you want "Line 1 (Virtual Audio Cable)" from the MME menu, for both input and output. Can you get it to work with either 44.1 or 48 KHz? > I have forced it. I found the article, that you also refered to month > ago, and in the same article as Brian wrote, I could see > the trick with change to I/O and back again to Portaudio. That seemed to > help. But it also worked last evening, and I'm not > sure why it didn't this morning. I will make a reboot, and see what's > going on after this. Changing to "File I/O" and back reopens the streams but shouldn't change anything else. Yes, I should have remembered that both DirectSound and MME report 44100 as the native sample rate. > I'm not sure how I measure if VAC emulates DirectSound properly ?. I use > VAC with MME as you can see on the attachment > to this mail. Would you please advice me on how to measure the emulate > query ?. I have no way of assessing how well VAC emulates a DirectSound audio device... but I do recall that Flex recommends MME with VAC(?) -- 73, Stelios, M0GLD. _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
