I have PTT working via Hamlib now, seems a slight PTT delay but not a major hassle. I suspect some conflict with hardware PTT option.
Thanks Andy K3UK On Sun, Mar 7, 2010 at 9:33 AM, w1hkj <[email protected]> wrote: > Andy obrien wrote: > > Is it just me ? It locks up when I attempt to configure separate > hardware PTT in 3.20 Rig control via hamlib is fine but I use > separate PTT. I have to reboot the software after it locks up during > an "initialize" attempt. > > Andy K3UK > _______________________________________________ > fldigi-alpha mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/fldigi-alpha > > > > Is the same serial port being used Andy? h/w PTT being set on the Hardware > PTT tab using the same serial port as hamlib tab will cause a conflict > between the two. Can you use the rigcat or perhaps flrig? Both of those > are designed to allow h/w ptt on the same serial port as CAT. > > hamlib probably does also ... just not implemented in fldigi as of 3.20 > > Dave > _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
