On Tue, Mar 16, 2010 at 4:49 AM, Stelios Bounanos <[email protected]> wrote: >>>>>> On Mon, 15 Mar 2010 22:05:07 -0400, Tony <[email protected]> said: > >> All, >> I'm using a Flex 5K with virtual audio cable. I'm getting the Fldigi >> "PortAudio error: Invalid number of channels" message at start up. Both >> Fldigi and VAC are using the same sample rate (48K) and the converter is >> set to Medium Sync Interpolator. Correction is 0 PPM. > >> The Flex and VAC work fine with other digital programs so not sure >> what's going on. > > I seem to recall that this error is related to the number of output vs. input > channels. Try unchecking "Enable right audio channel" in Configure->Sound > Card->Settings. This setting takes effect immediately, but if sound > initialisation has failed it may be safer to restart fldigi anyway. > > If this doesn't work, please run fldigi with `--debug-level 9' and send us a > copy of the event log. Copy the log from Help->Event log or find the file > status_log.txt in the folder opened via File->Folders->Fldigi config".
I believe this problem has gone away with, a) the beta code for fldigi plus, b) the current alpha code for PowerSDR. I haven't seen this problem for several weeks now. However, in the past when I got that error I would solve it by going into fldigi's sound-card setup, switching to a different sound-card, and then switching back to VAC. -- 73 de Brian, WB6RQN/J79BPL _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
