I pulled down the source code for flrig and fldigi last night and compiled the applications, and did a little testing.
The two applications don't seem to like each other. When fldigi is started, it causes my IC746Pro to "bounce" between VFO-A and VFO-B continuously. It does not matter what I do within the fldigi configuration, I can't get it to stop doing this with this combination. I do not have this issue with flrig 1.0.0-bP and fldigi 3.21.0BC. I first noted this behavior with flrig 1.0.0-bR. The bR code is when the program changed its "look" in the main window...and that is when my 746Pro went "bonkers" with the quick-switch between VFO-A and VFO-B. bX is a bit more well-behaved, although it seems to take a while to settle down after startup - I note multiple changes between VFO-A and VFO-B while the program is setting up the radio for the last-used configuration on VFO-A. I also note that on occasion the program fails to change the operating mode (e.g., LSB to digital USB) correctly. I experimented with the fldigi program and found that using RIGCAT or Hamlib, things work just fine...as far as those programs go. The whole reason I want to use flrig is that it is capable of setting my rig to use the digital USB mode (D-USB), which is not available with RIGCAT or Hamlib. 73, Eric Keerbs AD7HM _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
