On May 2, 2011, at 11:19 AM, Dick AA5VU wrote: > The issue or problem is the "PTT via Hamlib command" option in the > Hamlib configuration pane is now dimmed and fldigi does not key the > rig when the Hamlib option is selected for rig control. > > <http://www.qsl.net/aa5vu/temp_hamlib.png>
More than one has questioned why I selected the Kenwood TS-570S in the Hamlib rig selector. The Kenwood TS-590S is not currently an option in Hamlib and the TS-570S worked perfect with the TS-590S when I was using the SignaLink USB and the Keyspan USA-28A Serial-to-USB adapter. There were issues with the other Kenwood options and the only one that worked correct with the TS-590S was the TS-570S. I could be wrong but I do not think the rig selection has anything to do with Hamlib PTT issue. The SLAB_USBtoUART used in the Device selector is the USB to UART Bridge VCP Driver from Silicon Labs. The drivers for various platforms are aviable for download at http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx In addition to working with the Kenwood TS-590S, I understand the Silicon Labs drivers also work with new Icom IC-7410. I do not think the driver has anything to do with the Hamlab PTT issue since the driver works perfect with RigCAT. Has anyone tested and used the "PTT via Hamlib command" option? Dick AA5VU _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
