Hi Rob, Thu, Aug 11, 2011, Rob Frohne skribis: > I had a chance to play with fldigi on a camping trip we took using > my Yaesu FT-857D and here are my notes: > > 1) It would be nice to have the option in fldigi's setup to use > hamlib defaults for a particular rig. I found that rigctl worked > just fine, but at 4800 baud I needed 2.5 stop bits which isn't > available. It worked at 9600 baud with two stop bits. I would have
Do you think 2.5 stop bit support is still needed in Hamlib? We can arrange for that. > liked to try at 38400, but it wasn't an option. In conclusion, the > parameters in the hamlib setup window need to include "hamlib > default" (which you can see if you read the source code on any rig > in hamlib). That's kind of strange about the "hamlib default" in setup window. fldigi 3.22 has support for this, as can be checked in function hamlib_get_defaults() in src/rigcontrol/hamlib.cxx > 2) I liked the work around that you could "hardwire" the sideband > used. This allowed me to work around a hamlib deficiency that it > didn't get the sideband correct in the "Digital" mode which was > necessary for use with the audio inputs on the back of the rig. Is it something to be fixed in the FT-857D backend? BTW, what version of Hamlib and fldigi were you running? 73 -- Stephane - F8CFE _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
