Re: DTMF does not obey IDLE Macro... was "Re: fldigi 3.22.0AH posted"

Tue, 30 Aug 2011 15:53:26 -0700

Greetings

Further testing reveals that on our local repeater (Vertex VXR-5000 with Pacific Research RI-310 controller) the DTMF tone length sent from Fldigi is too short to be recognized.  Is there a way (or can a way be made) to adjust the DTMF tone duration?

73,
-Joe-

Joseph A. Counsil wrote:
Pavel,

Put spaces (as many as you want or need) before the first character, and even between characters, to introduce delays.  Works great.

So, I might use a macro like this to send a DTMF code:

<CLRTX><MODEM:BPSK31><GOFREQ:0000><TX><DTMF:          1 2 3 4><RX>

Put this all on one line so that there are no extra characters (carriage returns) that cause delay after the DTMF is sent.  Also notice that I set the mode to PSK31 and set it to 0 Hz on the waterfall.  This will get the tailing PSK31 signal out of the way and it should not cause any problems.

73,
-Joe-

-- 
+---------------------------------------------------------------+
| Joseph A. Counsil  [email protected]  Phone:(573) 341-5186 |
| 1310 Woodlawn Drive, Rolla, MO 65401  Amateur Radio: - KØOG - |
+---------------------------------------------------------------+



_______________________________________________
fldigi-alpha mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/fldigi-alpha

Reply via email to