Just FYI....HF Packet is alive and well NETWORK 105 (Since1986) is strong and growing. 40 plus stations on 24x7 Most are running personal mailbox and LOTS of kybrd<>kybrd. Also, SKIP Net is on several bands that are BBS .
Brian you can log onto yahoo group Network105 if you want to join. FYI Lee WB4QOJ --- On Fri, 2/10/12, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: Re: FLDIGI and Packet Operation: openpty() To: Cc: [email protected] Date: Friday, February 10, 2012, 7:59 PM Do you think it would work for HF packet at 300 bauds (If there is still some traffic there) ? Le 20.12.2011 17:01, Brian Lloyd a écrit : > > > On Tue, Dec 20, 2011 at 5:13 AM, Remi Chateauneu > <[email protected] <mailto:[email protected]>> wrote: > > This Perl module is probably a good starting point in term of > implementation: > http://search.cpan.org/~rbdavison/Device-TNC-0.03/lib/Device/TNC/KISS.pm > " This module trys to implement an easy way to talk to a KISS mode > Terminal Node Controller (TNC) such as the TNC-X via a serial port." > On Fri, Dec 9, 2011 at 3:40 PM, Tim Ellison, W4TME > <[email protected] <mailto:[email protected]>> wrote: > > A serial (com) port. > > A KISS TNC has a very limited command set, not like a full blown > hardware TNC > > > Just so everyone knows, here is the specification for the KISS protocol. > > http://www.ka9q.net/papers/kiss.html > > I was one of the original definers of KISS. KISS was created to allow > software on any computer with an async serial port to send TCP/IP > packets framed in the necessary HDLC frames used in AX.25. We had been > trying to decide how we were going interface various HDLC controller > chips to the PC-bus. I proposed the idea of using a TNC-2 as a simple > protocol converter connected to the PC's standard serial port. I > proposed a BISYNC-like protocol to run over the async serial link but > Mike Chepponis, K3MC, proposed we adapt SLIP which was, quite frankly, a > better solution than mine. He then went on to write the first version in > Z-80 assembler. > > KISS does not have any sort of user-readable command set. You cannot > connect a terminal program and type commands at it. OTOH, it is very > easy to write code to control a KISS TNC via the serial port. The KISS > code provides the low-level media-access-control (MAC) layer so that the > PC does not need to keep track of low-level timing. > > -- > Brian Lloyd, WB6RQN/J79BPL > 3191 Western Dr. > Cameron Park, CA 95682 > [email protected] <mailto:[email protected]> > +1.767.617.1365 (Dominica) > +1.916.877.5067 (USA) _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
_______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
