Ok, there is a difference there (below, sudo version contains pid at end of 
ESTAB line).

Running flent with sudo works even though I didn't used to need to do that on 
older Ubuntus. It's a fine workaround for now, only in addition, ss with my 
custom kernel doesn't show TCP RTT or a lot of other stats at all (third output 
below), so that could either be some needed kernel config or something else, so 
I'm off to figure out what that is. Thanks... :)

```
$ ss -tipn
State       Recv-Q         Send-Q                  Local Address:Port           
      Peer Address:Port         
ESTAB       0              0                          10.72.0.37:22             
        10.72.0.64:61418        
         cubic wscale:5,7 rto:204 rtt:0.34/0.071 ato:80 mss:1448 pmtu:1500 
rcvmss:1392 advmss:1448 cwnd:10 bytes_acked:13057 bytes_received:6621 
segs_out:130 segs_in:230 data_segs_out:123 data_segs_in:105 send 340.7Mbps 
lastsnd:108364 lastrcv:108420 lastack:108364 pacing_rate 681.4Mbps 
delivery_rate 139.6Mbps app_limited busy:12ms rcv_space:14600 
rcv_ssthresh:64076 minrtt:0.083
```

```
$ uname -a
Linux rey 5.0.0-16-generic #17-Ubuntu SMP Wed May 15 10:52:21 UTC 2019 x86_64 
x86_64 x86_64 GNU/Linux
$ sudo ss -tipn
State       Recv-Q         Send-Q                  Local Address:Port           
      Peer Address:Port         
ESTAB       0              0                          10.72.0.37:22             
        10.72.0.64:61418         
users:(("sshd",pid=9397,fd=3),("sshd",pid=9360,fd=3))
         cubic wscale:5,7 rto:204 rtt:0.34/0.071 ato:80 mss:1448 pmtu:1500 
rcvmss:1392 advmss:1448 cwnd:10 bytes_acked:13057 bytes_received:6621 
segs_out:130 segs_in:230 data_segs_out:123 data_segs_in:105 send 340.7Mbps 
lastsnd:119880 lastrcv:119936 lastack:119880 pacing_rate 681.4Mbps 
delivery_rate 139.6Mbps app_limited busy:12ms rcv_space:14600 
rcv_ssthresh:64076 minrtt:0.083
```

```
$ uname -a
Linux rey 5.1.0-rc2+ #63 SMP Mon Jun 3 17:45:55 CEST 2019 x86_64 x86_64 x86_64 
GNU/Linux
$ sudo ss -tipn
State       Recv-Q        Send-Q                Local Address:Port              
  Peer Address:Port         
ESTAB       0             0                        10.72.0.36:22                
    10.72.0.64:61660         
users:(("sshd",pid=4006,fd=3),("sshd",pid=3937,fd=3)) rto:0.2 ato:0.11 qack:8 
cwnd:10 reordering:0
```

-- 
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/tohojo/flent/issues/163#issuecomment-499524417
_______________________________________________
Flent-users mailing list
Flent-users@flent.org
http://flent.org/mailman/listinfo/flent-users_flent.org

Reply via email to