Thanks Toke,
I cloned the repository in a brand new VM, Once there I modified the runners.py
file removing the previous MARKING_MAP with my customized values. Then I ran a
test using your second proposed method:
> ./run-flent rrul_var --test-parameter bidir_streams=3 --test-parameter
> markings=0x28,0x34,0x38 --test-parameter labels='10','13','15' -H
> 192.168.9.13 -l 60
The packet capture shows the right hex values but seems like the labels are not
going thru:
Differentiated Services Field: 0x34 (DSCP: Unknown, ECN: Not-ECT)
Differentiated Services Field: 0x38 (DSCP: AF13, ECN: Not-ECT)
Differentiated Services Field: 0x28 (DSCP: Unknown, ECN: Not-ECT)
On cases where the hex value matches a value in the previous Marking_Map, like
0x38, it fills the DSCP label AF13. I also ran a test with no quotes on the
labels but got the same result. Needless to say first method didn't work
neither.
> ./run-flent rrul_var --test-parameter bidir_streams=5 --test-parameter
> markings=10,13,15,17,19 -H 10.200.9.13 -l 60
So, it seems like I'm missing something. I haven't properly installed flent
(setup.py install) as I though modifying the marking_map and using the
run-flent command would be enough.
Is that the case?
Thank you.
--
You are receiving this because you commented.
Reply to this email directly or view it on GitHub:
https://github.com/tohojo/flent/issues/203#issuecomment-620745795
_______________________________________________
Flent-users mailing list
Flent-users@flent.org
http://flent.org/mailman/listinfo/flent-users_flent.org
