Hi Suree ; Tnx For Given Idea [Or Suggestion] ; I Will Try it By Changing Height of The Canvas;
B.Praveen On Mon, Sep 19, 2011 at 12:05 PM, Suree <[email protected]> wrote: > Hi Praveen, > > I think the height of the slider is very less for snap interval of 0.01.I > tried the same with a height of 1500 and tick interval of 0.05(just for > reference) and able to achieve the snap interval of 0.01. > > See the below calculations(These are purely my thoughts.Somebody please > correct me if i am wrong) > > Maximum = 13,snap interval = 0.01 > > So no of units should be 13/0.01 = 1300 > > Height of the control = 400 > > so height of each unit is = 400/1300 = 0.307 > > in other world for each pixel 1300/400 ~= 3.25 units should be dragged. > > So in order to move the slider by one snap interval u need to move the > solder by 0.03 pixels which is almost impossible by ur mouse movement. > > > Thanks > Suresh > > -- > You received this message because you are subscribed to the Google Groups > "Flex India Community" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/flex_india/-/yTegVI_F5uoJ. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/flex_india?hl=en. > -- B.Praveen Kumar -- You received this message because you are subscribed to the Google Groups "Flex India Community" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/flex_india?hl=en.
