It seems to be a recurring problem that with running flexback via command
line it runs fine, even manually running the cron script. Though when I let the cron job run this is all I get: |------------------------------------------------------------ | Doing level 0 backup of /home using cpio | Rewinding & erasing tape... | Creating index key 200401262000 |------------------------------------------------------------ At block 0. |------------------------------------------------------------ | File number 1, tape index 200401262000 | Backup of: /home | Date of this level 0 backup: Mon Jan 26 20:00:30 2004 | Date of last level 0 backup: the epoch |------------------------------------------------------------ | touch "/home/level 0 -home Mon Jan 26 20:00:30 2004 cpio+hardware from \ | redhat" | cd "/home" && find . -depth -xdev ! -type s ! -regex ".*/[Cc]ache/.*" ! \ | -regex ".*~"$ -print0 | cpio -o -0 -H newc -v -C 10240 | buffer -m 15m \ | -p 75 -s 10k -t -u 100 -B -o "/dev/st0" | rm -f "/home/level 0 -home Mon Jan 26 20:00:30 2004 cpio+hardware from \ | redhat" |------------------------------------------------------------ But of course there is no file listing indicating a complete backup as there would be if the backup was successful or run manually in our case. Is there any known issues that would cause this? Thanks Shaun
E-Mail Disclaimer : http://www.altron.co.za/email.asp Should you have any questions regarding this e-mail legal notice please contact us on 1. Telephone number : +27116453600 2. Fax number : +27117263009 3. E-mail address : [EMAIL PROTECTED]
