Hi list and niall Can you run a simple tar to the drive?
mt -f /dev/st0 status - I've already answered mt -f /dev/st0 rewind Nothing too [EMAIL PROTECTED] flextest]# tar cf /dev/nst0 /etc tar: Retrait de l'en-tête `/' des noms des membres mt -f /dev/st0 rewind Take time but ok tar tf /dev/nst0 Ok it show me all the tar that I've done. Try manually setting the blocksize to the same as what you're using in the script. "mt -f /dev/st0 setblk 1024" and use $mt_blksize = "1024"; I've done it and do a Flexbackup-test-tape-drive but it's not better. Thanks for all Niall ******************************************************************** This email may contain information which is privileged or confidential. If you are not the intended recipient of this email, please notify the sender immediately and delete it without reading, copying, storing, forwarding or disclosing its contents to any other person Thank you Check us out at http://www.bt.com/consulting ******************************************************************** ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r _______________________________________________ flexbackup-help mailing list flexbackup-help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flexbackup-help
