Hi Tim, I would go for at least a dual CPU server as this will spread the load of garbage collections in Jrun. Also, it helps stop the OS and Jrun fighting over CPU resources.
Are you going to be running CFMX on that box too or on a separate machine? If you are then I'd definitely stick two CPUs in there, and lots of memory. 2GB seems like a good starting point. Regards Niklas > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of Tim Blair > Sent: Friday, May 13, 2005 2:54 PM > To: [email protected] > Subject: RE: [flexcoders] Flex Server Specification > > Thanks Dave, > > > Even if there will be other apps/instances, I'd keep it at 1 > > GB and simply add more RAM to the box (it's so cheap > > nowadays, it's a no-brainer). > > We're actually going for 2Gb -- we will be adding separate > instances in > the near future and it makes sense to go for this straight away. > > What CPU setup do you have/recommend? > > Tim. > > -- > ------------------------------------------------------- > Badpen Tech - CF and web-tech: http://tech.badpen.com/ > ------------------------------------------------------- > RAWNET LTD - independent digital media agency > "We are big, we are funny and we are clever!" > New site launched at http://www.rawnet.com/ > ------------------------------------------------------- > This message may contain information which is legally > privileged and/or confidential. If you are not the > intended recipient, you are hereby notified that any > unauthorised disclosure, copying, distribution or use > of this information is strictly prohibited. Such > notification notwithstanding, any comments, opinions, > information or conclusions expressed in this message > are those of the originator, not of rawnet limited, > unless otherwise explicitly and independently indicated > by an authorised representative of rawnet limited. > ------------------------------------------------------- > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
