Hey Tracy and Jason Thanks for the great suggestions. Jason that was quite a resourcefull link. Thanks for the same :) Thanks for your time.
Regards Fx. On 6/8/05, temporal_illusion <[EMAIL PROTECTED]> wrote: > I use the Echo portion of the Macromedia Flex Application Starter > Toolkit. They have a direct object inspector so you can just type in > the id of the object and you can view it in real time, as well as an > Echo console that you can send debug output to. > > http://www.macromedia.com/devnet/flex/articles/fast_userguide.html > > The nice thing about it is you can globally disable your debug code so > you can leave it in and enable it when it's needed. It also has a > timestamp function so you can see the timing of things and how long > they take, something I've found VERY useful. > > Jason > > --- In [email protected], flex scripter <[EMAIL PROTECTED]> > > wrote: > > Hi > > > > Is there anything like the trace action that we have in Flash in Flex > > Builder ? Or anything like when we did CNTRL-SHIFT-ENTER and opened a > > debugger where we could see the name and Value of the Variables. How > > can I do the same using the Flex Builder ? > > > > Thanks for your time and help. > > Fx. > > > > > ________________________________ > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/flexcoders/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
