Hi, The minimum and maximum properties of the LinearAxis are not bound to anything and they are the ones I have problems with (values not resetting when setting series visibility).
Only the minimum and maximum properties of the DateTimeAxis are bound and there is no problem with that part. Best regards, Karl. --- In flexcoders@yahoogroups.com, claudiu ursica <the_braniak@...> wrote: > > Hi Karl, > I am not an expert on the charts, I only played with an example from the docs > which updates nicely. Hence the request about some > basic example to see if it can be narrowed down. Unless you already try it, > you can debug the bindings via the > BindingManager.debugBinding() or wrap the min/max inside functions and add > temporary log/checks support inside those functions > to see if calls/updates are happenin. If it is a binding issue you are in > luck... > > On the other hand, you may also have to byte the bullet and replace the > bindings with hand written code. That way you get a better control of what > code is executing... > If it is a bug in the charts than you will need to fix/monkey patch it... > > Either way it helps if you can narrow it down to a simple example where you > can add/remove data from a button. If you can have that I can also > try to have a look at it. > > HTH, > C > > > > ________________________________ > From: k.sigiscar <k.sigiscar@...> > To: flexcoders@yahoogroups.com > Sent: Monday, July 9, 2012 3:19 PM > Subject: [flexcoders] Re: Resetting Chart scale on LineAxis > > > Â > > Hi Claudiu, > > Yes, I saw that one. But he's using a CategoryAxis and not a DateTimeAxis (we > bind the minimum and maximum properties of the DateTimeAxis to the values of > our timeline component). > > Therefore, we cannot do the same thing as he does to reset the chart scale. > > Best regards, > Karl. > > --- In flexcoders@yahoogroups.com, claudiu ursica <the_braniak@> wrote: > > > > Hi Karl, > > Can you share some basic example? I don't know how your chart and data > > looks like, and how you add/discard new data. > > > > I see you already ran into this and did not work... > > https://userflex.wordpress.com/2011/04/21/update-linear-axis/ > > > > C > > > > > > > > ________________________________ > > From: k.sigiscar <k.sigiscar@> > > To: flexcoders@yahoogroups.com > > Sent: Monday, July 9, 2012 10:24 AM > > Subject: [flexcoders] Resetting Chart scale on LineAxis > > > > > > ÃÂ > > Hi, > > > > I have a chart with dynamic series on a LinearAxis (Y) and a DateTimeAxis > > (X). > > > > The series visibility can be set to true / false by the user. > > > > When a series with a very high value is displayed, the rest of the chart is > > scaled down. > > > > When the series with the high values is then discarded (visibility set to > > false), the chart doesn't scale down again. > > > > Is there a way to force the chart to "reset its scale" (min/max) values ? > > > > Best regards, > > Karl Sigiscar. > > >
