|
Easy enough. height="{panel1.height-control1.height-control2.height}". I have a simple sample for states, with a transition here: That is what I tried at first, but it did not give me the results I expected. So I did not explore it further, it’s a minor nicety at this point.
What I’m really interested in is figuring out how to link my event containers to my detail state so that I can drill down into them. I’ll take a look at your links, thanks.
--------------
-- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com YAHOO! GROUPS LINKS
|
--- Begin Message ---
Easy enough. height="{panel1.height-control1.height-control2.height}". I have a simple sample for states, with a transition here:
http://www.cflex.net/showfiledetails.cfm?ChannelID=1&Object=File&objectID=422
It's based on Cairngorm, but maybe it will give you some ideas. If you ceate a model class, you can easily control state behavior with binding. The help docs have some good examples as well.
Glad to help,
Tim
--- In [email protected], "Ian Skinner" <[EMAIL PROTECTED]> wrote:
>
> Yeah Tim, that worked. height="{panel1.height - 160}" Now the really cool trick would be have the 160 be based on the height of the two controls above the grid. But for now, this is great.
>
>
>
> Now I am off to the biggest chalenge to date. Creating some behavious, states and maybe a transition. Not sure where to even start.
>
>
>
> --------------
> Ian Skinner
> Web Programmer
> BloodSource
> www.BloodSource.org
> Sacramento, CA
>
> ---------
> | 1 | |
> --------- Binary Soduko
> | | |
> ---------
>
> "C code. C code run. Run code run. Please!"
> - Cynthia Dunning
>
>
>
> Confidentiality Notice: This message including any
> attachments is for the sole use of the intended
> recipient(s) and may contain confidential and privileged
> information. Any unauthorized review, use, disclosure or
> distribution is prohibited. If you are not the
> intended recipient, please contact the sender and
> delete any copies of this message.
>
>
>
> Hi Ian,
>
> The first example was almost correct. This will work:
>
> <mx:DataGrid height="{parentPanel.height-50}"/>
>
> Change "parentPanel" to the id of your panel.
>
> -TH
>
> --- In [EMAIL PROTECTED] <mailto:flexcoders%40yahoogroups.com> ups.com, "Ian Skinner" ian.skinner@
> wrote:
> >
> > IâEUR(tm)m not having much luck with this. If I put it like you
> suggest I get an error about not allowing strings here.
> >
> > "{parentPanel.measuredHeight}-50"
> >
> >
> >
> > If I move the bracket, the error is not thrown, but my grid does
> not show up.
> >
> > "{parentPanel.measuredHeight-50}"
> >
> >
> >
> > Ian,
> >
> > The code should have been:
> >
> > <mx:DataGrid height="{parentPanel.measuredHeight}-50"/>
> >
> > -TH
> >
> >
> >
> >
> >
> > --------------
> > Ian Skinner
> > Web Programmer
> > BloodSource
> > www.BloodSource.org
> > Sacramento, CA
> >
> > ---------
> > | 1 | |
> > --------- Binary Soduko
> > | | |
> > ---------
> >
> > "C code. C code run. Run code run. Please!"
> > - Cynthia Dunning
> >
> >
> >
> > Confidentiality Notice: This message including any
> > attachments is for the sole use of the intended
> > recipient(s) and may contain confidential and privileged
> > information. Any unauthorized review, use, disclosure or
> > distribution is prohibited. If you are not the
> > intended recipient, please contact the sender and
> > delete any copies of this message.
> >
> >
> >
> > Ian,
> >
> > The code should have been:
> >
> > <mx:DataGrid height="{parentPanel.measuredHeight}-50"/>
> >
> > -TH
> >
> > --- In [EMAIL PROTECTED] <mailto:flexcoders%40yahoogroups.com>
> ups.com, "Tim Hoff" <TimHoff@> wrote:
> > >
> > >
> > > Hi Ian,
> > >
> > > Still pluggin along I see. I'd be intrested to see your code
> when
> > your
> > > done.
> > >
> > > You could base the height of the grid on the panel container.
> > Adjust
> > > the height to compensate for the other controls in the panel
> above
> > the
> > > grid.
> > >
> > > <mx:DataGrid height="{myPanel.Height}-50" />
> > >
> > > -TH
> > >
> > >
> > > --- In [EMAIL PROTECTED] <mailto:flexcoders%40yahoogroups.com>
> ups.com, "Ian Skinner" <ian.skinner@>
> > > wrote:
> > > >
> > > > I have a calendar of events type application I am building as a
> > > proposal to redo a venerable application with flex.
> > > >
> > > > I have the basic main page constructed and it work well with
> > just one
> > > minor annoyance. The main display consists of an absolute
> > application
> > > containing a single Panel. This panel is constrained to 25
> pixels
> > from
> > > the top, bottom, left and right edges of the application
> container.
> > > >
> > > > The panel is also configured as an absolute layout, containing
> > an HBox
> > > container with navigation controls positioned at the top, a
> small
> > grid
> > > of the days of the week (Monday, Tuesday, ect.) below the HBox.
> > Then
> > > comes the meat of the display, a second grid containing all the
> > days of
> > > the displayed month each showing a list of events.
> > > >
> > > > This grid is where I am having difficulty. If I give it an
> > absolute
> > > height (300) it works the way I want in that a scroll bar is
> > generated
> > > allowing the user the scroll through all the days and events
> > inside the
> > > 300 pixel high box in the middle of the application. But then it
> > is hard
> > > coded to 300 pixels high meaning that if the browser display is
> > large
> > > enough a portion of the panel space is blank because the grid
> can
> > not
> > > expand to fill it.
> > > >
> > > > But if I give the grid less absolute positioning, either
> > percentages
> > > or position it's edges (top, bottom, ect) within the panel, the
> > size is
> > > not enforced. The entire application is expanded to contain all
> > the days
> > > and events and the entire application then scrolls. Thus losing
> the
> > > navigation controls off the top of the browser canvas when the
> user
> > > scrolls down.
> > > >
> > > > Is there some way to constrain the grid to a certain section
> of
> > the
> > > panel so that it grows and shrinks in relationship to the panel
> but
> > > still not allow it to grow in relationship to the number and
> size
> > of the
> > > rows and cells inside it?
> > > >
> > > >
> > > > --------------
> > > > Ian Skinner
> > > > Web Programmer
> > > > BloodSource
> > > > www.BloodSource.org
> > > > Sacramento, CA
> > > >
> > > > ---------
> > > > | 1 | |
> > > > --------- Binary Soduko
> > > > | | |
> > > > ---------
> > > >
> > > > "C code. C code run. Run code run. Please!"
> > > > - Cynthia Dunning
> > > >
> > > > Confidentiality Notice: This message including any
> > > > attachments is for the sole use of the intended
> > > > recipient(s) and may contain confidential and privileged
> > > > information. Any unauthorized review, use, disclosure or
> > > > distribution is prohibited. If you are not the
> > > > intended recipient, please contact the sender and
> > > > delete any copies of this message.
> > > >
> > >
> >
>
--- End Message ---
