I'm curious, Mike. While the PrintJob.orientation property is read-only,
you can rotate the sprite based on what the orientation setting of the
printer is. Wouldn't that work?
Jurgen
Mike Weiland wrote:
Unfortunelty there is no way to set the orientation, it is read only.
What I do for http://www.CertificateCreator.com/
<http://www.CertificateCreator.com/> is when someone prints is to tell
them to set their printer to landscape. Once the print job is
processed I check the orientation and if it was not set to landscape I
alert them that their printer was not in landscape mode and for full
page printing they need to set their orientation to landscape.
This has been one of my requests since printing was added to Flash 4.
Good luck,
Mike Weiland
Original Message -----------------------
Is there anyway to define landscape to the printer?
I am working on a project that I need to print a single page that is in
landscape. I've created a component that is 800 x 600, the print job
adds that component as an print object and sends. If under the system
printer dialog box, I don't choose landscape, it won't print out
properly. I've tried rotating the object 90 degrees during the print
process and no luck.
Any suggestions?
thanks
