Hi, one of the best solution to is is to go to the link Project->Properties->Flex Applications and in the tree on the right, only include the flex application you are currently working on. Remove all the others from the tree. This would cause flex to build only the applications that are found in this tree. so if on another time you would like to work on anothe rone,just add it there before working because else the changes you have made on the application will not be build during compilation. hope this help you a lot in your development.
Regards, Desigaine On 8/28/07, Brian Holmes <[EMAIL PROTECTED]> wrote: > > Hi Lach, > > I've experienced this exact same thing. I've never really been able to > pin down the cause. FB seems to build faster at times than other times. It > could be my setup just as well as FB. Breaking the projects up and closing > them does help a bit. Using ant helps sometimes. Using RSL's helps a bit. > But those are definitely not silver bullets at least not for me. The only > thing I've been able to really do that works is close all projects except > for a sandbox project that I use to develop little bits of functionality > quickly, cos that does build quickly, then go thru the long process of > porting the code into my project. Not a good solution, but it's been getting > the job done. > > > > brian.. > > > > > > > > > ------------------------------ > > *From:* [email protected] [mailto:[EMAIL PROTECTED] *On > Behalf Of *Lachlan Cotter > *Sent:* Tuesday, August 28, 2007 4:31 AM > *To:* [email protected] > *Subject:* [flexcoders] Flex Builder issues with large projects > > > > Hi List, > > > > > > > > I'm having a lot of trouble with Flex Builder on a large project I'm > working on and would really appreciate some advice if anyone has found > themselves in a similar situation. > > > > The particular project I'm working on is approaching 30,000 lines of code > and also includes a fair bit of embedded assets in the form of skins and > images etc. I am building several different products from the same class > library. > > > > The first problem is that *compilation time is far too long*. Typically 30 > seconds or more even after very minor changes to the source code, about 2 > minutes for a clean build. It has become very difficult to do testing in > particular as the delay for compilation break up workflow too much. > > > > I thought I would try to solve this problem by using RSL from Flex Library > Projects as mentioned here: > > > > http://flexblog.faratasystems.com/?p=117 > > > > This does seem to greatly improve the compilation times, but has cased no > end of problems with Flex Builder. Flex Builder seemed to become corrupted, > would not allow me to add SWC files to projects, and even started to have > problems rendering the user interface. I did a complete uninstall and > reinstall of Flex Builder, but continued to have problems loading the > projects. > > > > Flex builder takes a long time to start up, reports stack overflow errors, > or simply will not start unless I remove the projects. > > > > I also tried using the Flex Builder 3 Beta, but also ran into [different] > problems which prevented me from loading and compiling the projects. > > > > Obviously, it's becoming pretty frustrating and inhibiting further > development. So my question is… > > > > *Has anybody experienced similar problems with Flex Builder, or know of > ways to optimise compilation times on large projects?* > > > > Any advice is greatly appreciated. > > > > > > Cheers, > > Lach > > ------------------------------ > *** > The information in this e-mail is confidential and intended solely for the > individual or entity to whom it is addressed. If you have received this > e-mail in error please notify the sender by return e-mail delete this e-mail > and refrain from any disclosure or action based on the information. > *** > > >
