I have tried it with the lock and without the lock. There is no difference. I have Flex 5000a with 2 receivers. RX1 is Ant 2, RX2 is Ant 1, TX is Ant 2. SR is enabled. Have tried with preamp on and off no change. Running 2.0.0.4 firmware with PB Pal Diversity 1.19.4 SVN 3497.
Barry Hiddema W5BLH 210-618-4774 -----Original Message----- From: Tim Ellison [mailto:[email protected]] Sent: Saturday, January 16, 2010 2:19 PM To: Barry Hiddema; [email protected] Subject: RE: [FlexEdge] Cannot Transmit with divesity enabled in PB Branch 1.19.4 Diversity Are the RX1 and TX antenna connectors "locked" in the Antenna form? -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Barry Hiddema Sent: Saturday, January 16, 2010 1:15 PM To: [email protected] Subject: [FlexEdge] Cannot Transmit with divesity enabled in PB Branch 1.19.4 Diversity I cannot transmit with diversity enabled in N4HY PB Branch 1.19.4. Is there any special setting required to transmit with diversity enabled? The radio transmits perfectly when diversity is not enabled. Barry Hiddema W5BLH 210-618-4774 _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
