All, Yes, I have observed the same problem since SVN 3524 when on CW. With break-in box NOT enabled, if I touch the paddle, the 5000 goes into TX mode with no RF output and does not return to RX mode until I close the PTT line.
Ron N0RR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, February 04, 2010 9:00 AM To: [email protected] Subject: Flexedge Digest, Vol 8, Issue 4 Send Flexedge mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of Flexedge digest..." Today's Topics: 1. Re: Version info..more detailed a request (Eric Wachsmann) 2. Problem with firmware 2.0.0.6 (Michael Jones) 3. Re: Problem with firmware 2.0.0.6 (Tim Ellison) 4. Re: Problem with firmware 2.0.0.6 (Michael Jones) 5. Re: Problem with firmware 2.0.0.6 (Tim Ellison) 6. Re: Problem with firmware 2.0.0.6 (Michael Jones) 7. Re: SVN Version 3524 (Dudley Hurry) 8. Possible Bug - Please test to to confirm (Mack McCormick) 9. audio drop out (David Gardner) 10. Re: Possible Bug - Please test to to confirm (Bob McGwier) 11. Re: Possible Bug - Please test to to confirm (Pete Flusser) 12. Re: Possible Bug - Please test to to confirm (Tim Ellison) 13. Set up scheme. (Erik Jakobsen) 14. Re: Set up scheme. (Tim Ellison) 15. Re: Set up scheme. (Larry da Ponte) 16. Re: Set up scheme. (Tim Ellison) 17. Re: Set up scheme. (Dudley Hurry) 18. Re: Set up scheme. (Erik Jakobsen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 3 Feb 2010 11:07:46 -0600 From: Eric Wachsmann <[email protected]> Subject: Re: [FlexEdge] Version info..more detailed a request To: "Steven O'Neal" <[email protected]> Cc: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset=ISO-8859-1 The ALC is applied in the DSP _after_ the VAC input. Does that answer your question? Eric Wachsmann FlexRadio Systems On Tue, Feb 2, 2010 at 10:44 PM, Steven O'Neal <[email protected]> wrote: > > > Thanks Tim > > Which output, the level to the VAC, or the RF output? > > > > From: [email protected] > > To: [email protected]; [email protected] > > Date: Tue, 2 Feb 2010 23:29:18 -0500 > > Subject: RE: [FlexEdge] Version info..more detailed a request > > > > It applies ALC to the output when operating digi modes. > > > > > > -Tim > > > > -----Original Message----- > > From: [email protected] [mailto: > [email protected]] On Behalf Of Steven O'Neal > > Sent: Tuesday, February 02, 2010 8:49 PM > > To: [email protected] > > Subject: Re: [FlexEdge] Version info..more detailed a request > > > > > > Cool then...so what is the ALC fix in DIGIx modes do that other older > versions didn't. That's probably my real question. > > > > Thanks > > > > _________________________________________________________________ > > Hotmail: Trusted email with powerful SPAM protection. > > http://clk.atdmt.com/GBL/go/201469227/direct/01/ > > _______________________________________________ > > Flexedge mailing list > > [email protected] > > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using alpha and beta versions of the software. > > _________________________________________________________________ > Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. > http://clk.atdmt.com/GBL/go/201469229/direct/01/ > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > ------------------------------ Message: 2 Date: Wed, 3 Feb 2010 10:14:51 -0700 From: "Michael Jones" <[email protected]> Subject: [FlexEdge] Problem with firmware 2.0.0.6 To: <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" I downloaded the new firmware file from the Flex site - I was confused as to why it is a stand-alone program and doesn't use the new "install via the FlexRadio Driver" method. Anyway - it pops up a little cmd window and goes along, clicks my Flex 3K relay when it is done - all seems OK. But, when I try to run PSDE (1.19.3 svn 3524) it hangs a few seconds into initialization. My Flex driver is version 3.5.0.71.71, PAL version is same. I am running this under W7x64 - I am running the firmware install as administrator - all the right stuff as far as I can tell. I can use the Flex Driver to reload 2.0.0.4 and all works fine - that was a big relief! Anyone else seen this behavior? Any suggestions? Best regards, Michael Jones W0STB ------------------------------ Message: 3 Date: Wed, 3 Feb 2010 12:36:47 -0500 From: Tim Ellison <[email protected]> Subject: Re: [FlexEdge] Problem with firmware 2.0.0.6 To: "[email protected]" <[email protected]>, "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" What URL are you using? That firmware is not on the downloads page. -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Michael Jones Sent: Wednesday, February 03, 2010 12:15 PM To: [email protected] Subject: [FlexEdge] Problem with firmware 2.0.0.6 I downloaded the new firmware file from the Flex site - I was confused as to why it is a stand-alone program and doesn't use the new "install via the FlexRadio Driver" method. Anyway - it pops up a little cmd window and goes along, clicks my Flex 3K relay when it is done - all seems OK. But, when I try to run PSDE (1.19.3 svn 3524) it hangs a few seconds into initialization. My Flex driver is version 3.5.0.71.71, PAL version is same. I am running this under W7x64 - I am running the firmware install as administrator - all the right stuff as far as I can tell. I can use the Flex Driver to reload 2.0.0.4 and all works fine - that was a big relief! Anyone else seen this behavior? Any suggestions? Best regards, Michael Jones W0STB _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. ------------------------------ Message: 4 Date: Wed, 3 Feb 2010 10:45:33 -0700 From: "Michael Jones" <[email protected]> Subject: Re: [FlexEdge] Problem with firmware 2.0.0.6 To: "'Tim Ellison'" <[email protected]>, <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" Hi Tim, I just went to the Flex page->Support->Downloads - it's the first thing listed. I guess I used the wrong name referring to it - its version 1.2.5.6 - I got confused. I thought that since it says it needs drive v3.5.0.7171 that is was more current than the 2.0.0.4 one with a similar name two slots down. It's not at all clear to me what the differences are or which one to use. Best regards, Michael Jones SCSI Toolbox LLC www.scsitoolbox.com 303-972-2072 -----Original Message----- From: Tim Ellison [mailto:[email protected]] Sent: Wednesday, February 03, 2010 10:37 AM To: [email protected]; [email protected] Subject: RE: [FlexEdge] Problem with firmware 2.0.0.6 What URL are you using? That firmware is not on the downloads page. -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Michael Jones Sent: Wednesday, February 03, 2010 12:15 PM To: [email protected] Subject: [FlexEdge] Problem with firmware 2.0.0.6 I downloaded the new firmware file from the Flex site - I was confused as to why it is a stand-alone program and doesn't use the new "install via the FlexRadio Driver" method. Anyway - it pops up a little cmd window and goes along, clicks my Flex 3K relay when it is done - all seems OK. But, when I try to run PSDE (1.19.3 svn 3524) it hangs a few seconds into initialization. My Flex driver is version 3.5.0.71.71, PAL version is same. I am running this under W7x64 - I am running the firmware install as administrator - all the right stuff as far as I can tell. I can use the Flex Driver to reload 2.0.0.4 and all works fine - that was a big relief! Anyone else seen this behavior? Any suggestions? Best regards, Michael Jones W0STB _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. ------------------------------ Message: 5 Date: Wed, 3 Feb 2010 12:55:24 -0500 From: Tim Ellison <[email protected]> Subject: Re: [FlexEdge] Problem with firmware 2.0.0.6 To: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" Reload 2.0.0.4 and all should be ok -Tim -------- Sent from my iPhone On Feb 3, 2010, at 12:45 PM, "Michael Jones" <[email protected]> wrote: > Hi Tim, > > I just went to the Flex page->Support->Downloads - it's the first > thing > listed. > I guess I used the wrong name referring to it - its version 1.2.5.6 > - I got > confused. > I thought that since it says it needs drive v3.5.0.7171 that is was > more > current than the 2.0.0.4 one with a similar name two slots down. > It's not at all clear to me what the differences are or which one to > use. > > > > Best regards, > > Michael Jones > SCSI Toolbox LLC > www.scsitoolbox.com > 303-972-2072 > > > -----Original Message----- > From: Tim Ellison [mailto:[email protected]] > Sent: Wednesday, February 03, 2010 10:37 AM > To: [email protected]; [email protected] > Subject: RE: [FlexEdge] Problem with firmware 2.0.0.6 > > What URL are you using? That firmware is not on the downloads page. > > > -Tim > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Michael Jones > Sent: Wednesday, February 03, 2010 12:15 PM > To: [email protected] > Subject: [FlexEdge] Problem with firmware 2.0.0.6 > > I downloaded the new firmware file from the Flex site - I was > confused as to > why it is a stand-alone program and doesn't use the new "install via > the > FlexRadio Driver" method. > > > > Anyway - it pops up a little cmd window and goes along, clicks my > Flex 3K > relay when it is done - all seems OK. > > But, when I try to run PSDE (1.19.3 svn 3524) it hangs a few seconds > into > initialization. > > > > My Flex driver is version 3.5.0.71.71, PAL version is same. > > I am running this under W7x64 - I am running the firmware install as > administrator - all the right stuff as far as I can tell. > > > > I can use the Flex Driver to reload 2.0.0.4 and all works fine - > that was a > big relief! > > > > Anyone else seen this behavior? Any suggestions? > > > > > > Best regards, > > > > Michael Jones W0STB > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It > is used > for posting topics related to SDR software development and > experimentalist > who are using alpha and beta versions of the software. > ------------------------------ Message: 6 Date: Wed, 3 Feb 2010 10:56:40 -0700 From: "Michael Jones" <[email protected]> Subject: Re: [FlexEdge] Problem with firmware 2.0.0.6 To: "'Tim Ellison'" <[email protected]> Cc: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" T'is - thanks! Best regards, Michael Jones W0STB -----Original Message----- From: Tim Ellison [mailto:[email protected]] Sent: Wednesday, February 03, 2010 10:55 AM To: [email protected] Cc: [email protected] Subject: Re: [FlexEdge] Problem with firmware 2.0.0.6 Reload 2.0.0.4 and all should be ok -Tim -------- Sent from my iPhone On Feb 3, 2010, at 12:45 PM, "Michael Jones" <[email protected]> wrote: > Hi Tim, > > I just went to the Flex page->Support->Downloads - it's the first > thing listed. > I guess I used the wrong name referring to it - its version 1.2.5.6 > - I got > confused. > I thought that since it says it needs drive v3.5.0.7171 that is was > more current than the 2.0.0.4 one with a similar name two slots down. > It's not at all clear to me what the differences are or which one to > use. > > > > Best regards, > > Michael Jones > SCSI Toolbox LLC > www.scsitoolbox.com > 303-972-2072 > > > -----Original Message----- > From: Tim Ellison [mailto:[email protected]] > Sent: Wednesday, February 03, 2010 10:37 AM > To: [email protected]; [email protected] > Subject: RE: [FlexEdge] Problem with firmware 2.0.0.6 > > What URL are you using? That firmware is not on the downloads page. > > > -Tim > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Michael Jones > Sent: Wednesday, February 03, 2010 12:15 PM > To: [email protected] > Subject: [FlexEdge] Problem with firmware 2.0.0.6 > > I downloaded the new firmware file from the Flex site - I was confused > as to why it is a stand-alone program and doesn't use the new "install > via the FlexRadio Driver" method. > > > > Anyway - it pops up a little cmd window and goes along, clicks my Flex > 3K relay when it is done - all seems OK. > > But, when I try to run PSDE (1.19.3 svn 3524) it hangs a few seconds > into initialization. > > > > My Flex driver is version 3.5.0.71.71, PAL version is same. > > I am running this under W7x64 - I am running the firmware install as > administrator - all the right stuff as far as I can tell. > > > > I can use the Flex Driver to reload 2.0.0.4 and all works fine - that > was a big relief! > > > > Anyone else seen this behavior? Any suggestions? > > > > > > Best regards, > > > > Michael Jones W0STB > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using alpha and beta versions of the software. > ------------------------------ Message: 7 Date: Wed, 03 Feb 2010 18:49:00 -0600 From: Dudley Hurry <[email protected]> Subject: Re: [FlexEdge] SVN Version 3524 To: Chris Gerber <[email protected]> Cc: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Chris, Personally I disagree, if we all know that the transmit default is 50 watts , just have to make sure to have that set before you TX.. Also there is already a default setting you can change, just go into the SSB TX profiles after you have already set the power setting and click Save. By default there is only two. And once you set the Drive setting in a mode (like CW) the power setting is the same when you restart PowerSDR. Tune is already defaulted to 10 watts. 73, Dudley WA5QPZ Chris Gerber wrote: > Hi > > I noticed some strange behaving in SVN version 3524 > > If I use the mousewheel to change either RX or TX RIT it does not release > the mousewheel function unless I hit the Start/Stop or VAC ON/OFF > buttons, > the I am able to change the VFO Frequency steps again with my mouse > wheel. > Also some annoyance is the defaul Drive setting of 50. > This can be very dangerous to any Linearamplifier if not watched > (Overdrive) when using > VAC with any Digimode program ! > A defaul Drive setting should always be zero (0), and be set accoding > when used. > > 73 Chris HB9BDM > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using alpha and beta versions of the software. > ------------------------------ Message: 8 Date: Wed, 3 Feb 2010 20:47:03 -0500 From: Mack McCormick <[email protected]> Subject: [FlexEdge] Possible Bug - Please test to to confirm To: "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-1" Will someone please test to see if I've found a bug in the latest PB-PAL SVN before I submit a bug report? While in SSB (either USB or LSB) press your paddle/key that is plugged directly into the back of the Flex. No CWX or com port keying please. Does your audio quit? My Flex 5000A goes completely quiet. Only the audio dies. The only way to restore the audio is to completely exit PowerSDR and restart. Win XP SP3, all patches. This just started today with the latest SVN. You may ask why someone would press their paddle when in SSB. When I'm in a long net I often practice my CW using the sidetone on my K1EL keyer. 73, Mack WB4MAK ------------------------------ Message: 9 Date: Wed, 3 Feb 2010 20:51:42 -0500 From: "David Gardner" <[email protected]> Subject: [FlexEdge] audio drop out To: <[email protected]> Message-ID: <93eaccc9b9164d0e8de0b4c664270...@davidgardnerpc> Content-Type: text/plain; charset="iso-8859-1" I am seeing the same thing happen as you describe. Dave-W4DWG ------------------------------ Message: 10 Date: Thu, 4 Feb 2010 02:29:18 +0000 From: "Bob McGwier" <[email protected]> Subject: Re: [FlexEdge] Possible Bug - Please test to to confirm To: "Mack McCormick" <[email protected]>, [email protected], "[email protected]" <[email protected]> Message-ID: <1875052611-1265250561-cardhu_decombobulator_blackberry.rim.net-7814252...@b da345.bisx.prod.on.blackberry> Content-Type: text/plain Acknowledged. Bob ------Original Message------ From: Mack McCormick Sender: [email protected] To: [email protected] Subject: [FlexEdge] Possible Bug - Please test to to confirm Sent: Feb 3, 2010 8:47 PM Will someone please test to see if I've found a bug in the latest PB-PAL SVN before I submit a bug report? While in SSB (either USB or LSB) press your paddle/key that is plugged directly into the back of the Flex. No CWX or com port keying please. Does your audio quit? My Flex 5000A goes completely quiet. Only the audio dies. The only way to restore the audio is to completely exit PowerSDR and restart. Win XP SP3, all patches. This just started today with the latest SVN. You may ask why someone would press their paddle when in SSB. When I'm in a long net I often practice my CW using the sidetone on my K1EL keyer. 73, Mack WB4MAK _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. Sent from my Verizon Wireless BlackBerry ------------------------------ Message: 11 Date: Wed, 3 Feb 2010 18:32:23 -0800 From: Pete Flusser <[email protected]> Subject: Re: [FlexEdge] Possible Bug - Please test to to confirm To: <[email protected]>, <[email protected]>, <[email protected]>, <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-1" I am having the same problem. Pete W6PBF > To: [email protected]; [email protected]; [email protected] > From: [email protected] > Date: Thu, 4 Feb 2010 02:29:18 +0000 > Subject: Re: [FlexEdge] Possible Bug - Please test to to confirm > > Acknowledged. > > Bob > > ------Original Message------ > From: Mack McCormick > Sender: [email protected] > To: [email protected] > Subject: [FlexEdge] Possible Bug - Please test to to confirm > Sent: Feb 3, 2010 8:47 PM > > > Will someone please test to see if I've found a bug in the latest PB-PAL SVN before I submit a bug report? > > While in SSB (either USB or LSB) press your paddle/key that is plugged directly into the back of the Flex. No CWX or com port keying please. Does your audio quit? My Flex 5000A goes completely quiet. Only the audio dies. The only way to restore the audio is to completely exit PowerSDR and restart. Win XP SP3, all patches. > > This just started today with the latest SVN. You may ask why someone would press their paddle when in SSB. When I'm in a long net I often practice my CW using the sidetone on my K1EL keyer. > > 73, > > > > Mack > > WB4MAK > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. > > > Sent from my Verizon Wireless BlackBerry > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _________________________________________________________________ Hotmail: Free, trusted and rich email service. http://clk.atdmt.com/GBL/go/201469228/direct/01/ ------------------------------ Message: 12 Date: Wed, 3 Feb 2010 22:13:25 -0500 From: Tim Ellison <[email protected]> Subject: Re: [FlexEdge] Possible Bug - Please test to to confirm To: Pete Flusser <[email protected]>, "[email protected]" <[email protected]>, "[email protected]" <[email protected]>, "[email protected]" <[email protected]>, "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" Sounds like a bug that needs to be logged in the Bug Tracker. -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Pete Flusser Sent: Wednesday, February 03, 2010 9:32 PM To: [email protected]; [email protected]; [email protected]; [email protected] Subject: Re: [FlexEdge] Possible Bug - Please test to to confirm I am having the same problem. Pete W6PBF > To: [email protected]; [email protected]; [email protected] > From: [email protected] > Date: Thu, 4 Feb 2010 02:29:18 +0000 > Subject: Re: [FlexEdge] Possible Bug - Please test to to confirm > > Acknowledged. > > Bob > > ------Original Message------ > From: Mack McCormick > Sender: [email protected] > To: [email protected] > Subject: [FlexEdge] Possible Bug - Please test to to confirm > Sent: Feb 3, 2010 8:47 PM > > > Will someone please test to see if I've found a bug in the latest PB-PAL SVN before I submit a bug report? > > While in SSB (either USB or LSB) press your paddle/key that is plugged directly into the back of the Flex. No CWX or com port keying please. Does your audio quit? My Flex 5000A goes completely quiet. Only the audio dies. The only way to restore the audio is to completely exit PowerSDR and restart. Win XP SP3, all patches. > > This just started today with the latest SVN. You may ask why someone would press their paddle when in SSB. When I'm in a long net I often practice my CW using the sidetone on my K1EL keyer. > > 73, > > > > Mack > > WB4MAK > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. > > > Sent from my Verizon Wireless BlackBerry > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _________________________________________________________________ Hotmail: Free, trusted and rich email service. http://clk.atdmt.com/GBL/go/201469228/direct/01/ _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. ------------------------------ Message: 13 Date: Thu, 04 Feb 2010 13:58:17 +0100 From: Erik Jakobsen <[email protected]> Subject: [FlexEdge] Set up scheme. To: "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset=ISO-8859-1 Hi Tim. Would you please give me a set up list for setting up PB-PAL. Just what I need to download. It's for Windows XP PRO SP3 TIA 73's Erik OZ4KK ------------------------------ Message: 14 Date: Thu, 4 Feb 2010 08:19:04 -0500 From: Tim Ellison <[email protected]> Subject: Re: [FlexEdge] Set up scheme. To: Erik Jakobsen <[email protected]>, "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" I assume you are using a FLEX-x000 SDR. Download and install the v3.5.0.7171 Firewire driver Download and install firmware 2.0.0.4 Install .NET 3.5 SP 1 Checkout the PB-PAL release folder from SVN -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Erik Jakobsen Sent: Thursday, February 04, 2010 7:58 AM To: [email protected] Subject: [FlexEdge] Set up scheme. Hi Tim. Would you please give me a set up list for setting up PB-PAL. Just what I need to download. It's for Windows XP PRO SP3 TIA 73's Erik OZ4KK _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. ------------------------------ Message: 15 Date: Thu, 4 Feb 2010 07:20:30 -0800 From: Larry da Ponte <[email protected]> Subject: Re: [FlexEdge] Set up scheme. To: Tim Ellison <[email protected]> Cc: "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii; format=flowed; delsp=yes Is a level and image calibration required after the firmware upgrade? -Larry On Feb 4, 2010, at 5:19 AM, Tim Ellison <[email protected]> wrote: > I assume you are using a FLEX-x000 SDR. > > Download and install the v3.5.0.7171 Firewire driver > Download and install firmware 2.0.0.4 > Install .NET 3.5 SP 1 > Checkout the PB-PAL release folder from SVN > > > -Tim > > -----Original Message----- > From: [email protected] [mailto:flexedge-boun...@flex- > radio.biz] On Behalf Of Erik Jakobsen > Sent: Thursday, February 04, 2010 7:58 AM > To: [email protected] > Subject: [FlexEdge] Set up scheme. > > Hi Tim. > > Would you please give me a set up list for setting up PB-PAL. > > Just what I need to download. > > It's for Windows XP PRO SP3 > > TIA > > 73's Erik OZ4KK > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It > is used for posting topics related to SDR software development and > experimentalist who are using alpha and beta versions of the software. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It > is used for posting topics related to SDR software development and > experimentalist who are using alpha and beta versions of the software. ------------------------------ Message: 16 Date: Thu, 4 Feb 2010 10:57:29 -0500 From: Tim Ellison <[email protected]> Subject: Re: [FlexEdge] Set up scheme. To: Larry da Ponte <[email protected]> Cc: "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" Not that I know of. You might want to do an RX image calibration because that is needed for WBIR to have initial starting points. -Tim -----Original Message----- From: Larry da Ponte [mailto:[email protected]] Sent: Thursday, February 04, 2010 10:21 AM To: Tim Ellison Cc: Erik Jakobsen; [email protected] Subject: Re: [FlexEdge] Set up scheme. Is a level and image calibration required after the firmware upgrade? -Larry On Feb 4, 2010, at 5:19 AM, Tim Ellison <[email protected]> wrote: > I assume you are using a FLEX-x000 SDR. > > Download and install the v3.5.0.7171 Firewire driver Download and > install firmware 2.0.0.4 Install .NET 3.5 SP 1 Checkout the PB-PAL > release folder from SVN > > > -Tim > > -----Original Message----- > From: [email protected] [mailto:flexedge-boun...@flex- > radio.biz] On Behalf Of Erik Jakobsen > Sent: Thursday, February 04, 2010 7:58 AM > To: [email protected] > Subject: [FlexEdge] Set up scheme. > > Hi Tim. > > Would you please give me a set up list for setting up PB-PAL. > > Just what I need to download. > > It's for Windows XP PRO SP3 > > TIA > > 73's Erik OZ4KK > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using alpha and beta versions of the software. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using alpha and beta versions of the software. ------------------------------ Message: 17 Date: Thu, 4 Feb 2010 10:07:40 -0600 From: Dudley Hurry <[email protected]> Subject: Re: [FlexEdge] Set up scheme. To: Tim Ellison <[email protected]> Cc: "[email protected]" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset=windows-1252 And don't forget to load the skins from Downloads. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595 Email: [email protected] Web: www.flex-radio.com "Tune in excitement!" ? On Thu, Feb 4, 2010 at 9:57 AM, Tim Ellison <[email protected]> wrote: > Not that I know of. > > You might want to do an RX image calibration because that is needed for > WBIR to have initial starting points. > > > -Tim > > -----Original Message----- > From: Larry da Ponte [mailto:[email protected]] > Sent: Thursday, February 04, 2010 10:21 AM > To: Tim Ellison > Cc: Erik Jakobsen; [email protected] > Subject: Re: [FlexEdge] Set up scheme. > > Is a level and image calibration required after the firmware upgrade? > > -Larry > > > On Feb 4, 2010, at 5:19 AM, Tim Ellison <[email protected]> wrote: > > > I assume you are using a FLEX-x000 SDR. > > > > Download and install the v3.5.0.7171 Firewire driver Download and > > install firmware 2.0.0.4 Install .NET 3.5 SP 1 Checkout the PB-PAL > > release folder from SVN > > > > > > -Tim > > > > -----Original Message----- > > From: [email protected] [mailto:flexedge-boun...@flex- > > radio.biz] On Behalf Of Erik Jakobsen > > Sent: Thursday, February 04, 2010 7:58 AM > > To: [email protected] > > Subject: [FlexEdge] Set up scheme. > > > > Hi Tim. > > > > Would you please give me a set up list for setting up PB-PAL. > > > > Just what I need to download. > > > > It's for Windows XP PRO SP3 > > > > TIA > > > > 73's Erik OZ4KK > > > > _______________________________________________ > > Flexedge mailing list > > [email protected] > > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > > used for posting topics related to SDR software development and > > experimentalist who are using alpha and beta versions of the software. > > > > _______________________________________________ > > Flexedge mailing list > > [email protected] > > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > > used for posting topics related to SDR software development and > > experimentalist who are using alpha and beta versions of the software. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > ------------------------------ Message: 18 Date: Thu, 04 Feb 2010 17:58:14 +0100 From: Erik Jakobsen <[email protected]> Subject: Re: [FlexEdge] Set up scheme. To: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset=windows-1252 Thank you for your info Dudley. I have done it :-) 73s-Erik-OZ4KK > And don't forget to load the skins from Downloads. > > > > 73, > Dudley > > WA5QPZ > FlexRadio Systems > > (512) 250-8595 > Email: [email protected] > Web: www.flex-radio.com > > "Tune in excitement!" ? > > > > On Thu, Feb 4, 2010 at 9:57 AM, Tim Ellison <[email protected]> wrote: > > >> Not that I know of. >> >> You might want to do an RX image calibration because that is needed for >> WBIR to have initial starting points. >> >> >> -Tim >> >> -----Original Message----- >> From: Larry da Ponte [mailto:[email protected]] >> Sent: Thursday, February 04, 2010 10:21 AM >> To: Tim Ellison >> Cc: Erik Jakobsen; [email protected] >> Subject: Re: [FlexEdge] Set up scheme. >> >> Is a level and image calibration required after the firmware upgrade? >> >> -Larry >> >> >> On Feb 4, 2010, at 5:19 AM, Tim Ellison <[email protected]> wrote: >> >> >>> I assume you are using a FLEX-x000 SDR. >>> >>> Download and install the v3.5.0.7171 Firewire driver Download and >>> install firmware 2.0.0.4 Install .NET 3.5 SP 1 Checkout the PB-PAL >>> release folder from SVN >>> >>> >>> -Tim >>> >>> -----Original Message----- >>> From: [email protected] [mailto:flexedge-boun...@flex- >>> radio.biz] On Behalf Of Erik Jakobsen >>> Sent: Thursday, February 04, 2010 7:58 AM >>> To: [email protected] >>> Subject: [FlexEdge] Set up scheme. >>> >>> Hi Tim. >>> >>> Would you please give me a set up list for setting up PB-PAL. >>> >>> Just what I need to download. >>> >>> It's for Windows XP PRO SP3 >>> >>> TIA >>> >>> 73's Erik OZ4KK >>> >>> _______________________________________________ >>> Flexedge mailing list >>> [email protected] >>> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >>> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >>> used for posting topics related to SDR software development and >>> experimentalist who are using alpha and beta versions of the software. >>> >>> _______________________________________________ >>> Flexedge mailing list >>> [email protected] >>> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >>> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >>> used for posting topics related to SDR software development and >>> experimentalist who are using alpha and beta versions of the software. >>> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used >> for posting topics related to SDR software development and experimentalist >> who are using alpha and beta versions of the software. >> >> > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. > ------------------------------ _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. End of Flexedge Digest, Vol 8, Issue 4 ************************************** _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
