Dave, Yes, on the SVN you will need to perform the RX Image test (only!) don't perform any of the other test as they may not be fully functional..
Be sure to remove all the antennas from the radio, use a dummy load to antenna 1 if you have it available. Let it run for all bands, without stopping. Just remember, that if you go back to 1.18.5 to rerun the image calibrations for that version or you might hear images there. 73, Dudley WA5QPZ FlexRadio Systems (512) 535-4713, Option 2 Email: [email protected] Web: www.flex-radio.com "Tune in excitement!" ™ On Wed, Apr 21, 2010 at 4:53 PM, Dave <[email protected]> wrote: > Running Flex 5000A with PB-PAL build 3638, > Windows 7 64 bit, > Firewire driver version 3.5.2.8028, > Firmware version 2.0.2.2 > > Configured Firewire and radio for 192k/2048. > > On 75 meters and seeing & hearing opposite sideband images on several > stations. Does PB-PAL code require you to perform rx image rejection? > > I did not notice this with build 3624 and it does not happen with PowerSDR > 1.18.5/firmware 1.3.0.8. > > Thanks > Dave > wo2x > > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
