Hello All,
I am frustrated by always having to manually adjust the Setup->Display->Waterfall->Low Level setting to get a proper waterfall display. In my case I always have to adjust it manually every time I restart PSDR. Even if the setting level is set at the current noise floor level I still need to go in and bump the waterfall low level either up or down - and then the display looks as it should. For a real world example - I just powered up the rig (F3K, 1.19.3 svn 3671, fw 2.0.1.1, driver/pal 3.5.2.8028), on 20 meters on my half-square antenna. The noise is right at - 110 , and the waterfall low level setting is -110. On the panafall display the waterfall is solid emerald green. If I go into setup and bump the low level up to -100 then back down to -100 everything is perfect as it should be. Further playing with the low level setting I can get that identical solid emerald green waterfall by setting the waterfall low level to be 20 lower (noise is at -110, level set at -130). Could this mean that the program is not looking at last or current waterfall low level setting upon initialization but is instead defaulting to -130? Two questions: 1. Is this behavior normal and does anyone else experience it? 2. Could the proper waterfall setting be automated? Best regards, Michael Jones W0STB SCSI Toolbox LLC www.scsitoolbox.com <http://www.scsitoolbox.com/> 303-972-2072 while (!(succeed==try())) _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
