There is not a standalone firmware extractor anymore. Firmware is now delivered via the new PowerSDR Integrated Installer (PII). In the KB article you are referring to (http://kc.flex-radio.com/KnowledgebaseArticle50441.aspx), the section Phase I will be re-written shortly to reflect using the PII. Phase II is still applicable. The firmware is still placed in a folder in the logged on user's My Documents (or Documents) folder, so running as administrator should not be required.
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steven L Hess Sent: Friday, May 28, 2010 11:19 PM To: [email protected] Subject: [FlexEdge] Anyone done a Windows 7 64 install of 2.0? I am running Windows 7 64 with UAC still turned on. I am interested in how you flashed the firmware eprom. I am thinking I would have to run the firmware extractor as administrator if my reading of the knowledge base article is correct. Steven -- Regards de KC6KGE Skype flamebait Monitoring at least one of the following Frequencies if the radio is on and I am not on a net or using the digital modes; 3975, 14.329. I am always listening for fellow Flexers. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
