Run the RX image calibration routine. You have to baseline WBIR http://kc.flex-radio.com/KnowledgebaseArticle50140.aspx
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dave Sent: Saturday, May 29, 2010 6:41 PM To: Flexedge Subject: [FlexEdge] Rx images with PSDR 2.0 Beta 2 - after record & playback Hi All, I noticed rx images using PSDR 2.0 Beta 2. This is on 75 meters LSB. CLicking on SPEC, then LSB causes the images to clear up. Then they show up again sometimes after doing the following steps: 1. Wave recording is set up for rx post processed, tx pre-processed. 2. click on quick record to record someone. Click on quick record to stop it and save. 3. key up then click play to play it back over the air. 4. Unkey Intermittently the rx images will return. Clicking on SPEC and then LSB clears the images. I have run the rx image calibration with no antenna connected. I'll file a bug report. Dave wo2x _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
