2.0.1.2 On 05/29/2010 09:04 PM, Tim Ellison wrote: > Do you have the latest FLEX-3000 firmware loaded as recommended in the > release notes? V2.0.1.2 > > > -Tim > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Steven L Hess > Sent: Saturday, May 29, 2010 11:52 PM > To: [email protected] > Subject: [FlexEdge] Program fails on attempt to use ATU > > PowerSDR 2.0 beta > Windows 7 64 > AMD X4 945 3.0Ghz 4 gigs memory > > When ATU is selected PowerSDR goes into transmit and the Program exits > instantly. http://www.slhess.com/pictures/ATUfail.png > Failed on a 102 foot Dipole, Heath cantenna dummy load and a Drake 50 ohm > resistor Dummy load. I think it even stayed in transmit until I hit "cancel" > on the popup at least once. (The antenna is a 102 foot dipole fed with > balanced line to a one to one ferrite bead current balun on three feet of > LMR-400) > > I have never even attempted to use the internal tuner since I purchased the > Flex-3000 new so I don't know if this is a hardware problem. I didn't expect > the internal tuner to tune this antenna but I didn't expect the program to > exit either hihi. > > Steven > > -- > Regards de KC6KGE > Skype flamebait > Monitoring at least one of the following Frequencies if the radio is on and I > am not on a net or using the digital modes; 3975, 14.329. I am always > listening for fellow Flexers. > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > >
-- Sent from my Linux box. Regards de KC6KGE Skype flamebait Monitoring at least one of the following Frequencies if the radio is on and I am not on a net or using the digital modes; 3975, 14.329. I am always listening for fellow Flexers. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
