Band surfing last night- arrived on 10M. White noisy. Hit NR button, noise disappeared magically. After a few moments, however, noise level gradually increased back to full noise level. Turned NR off and on again, and noise disappeared, only to return moments later. Did this a few times, so it was real.
Is this a feature, a bug, settings, operator error, or magic? F5K, XP SP3, PSDR 2.0 Beta, newest firmware, (have not yet re-calibrated RX). Jim KJ2P > From: [email protected] > To: [email protected]; [email protected] > Date: Tue, 1 Jun 2010 10:23:53 -0400 > Subject: Re: [FlexEdge] VOX ? > > I am not sure about VOX, but there is a PTT over-ride feature to allow voice > communications when VAC is active. > > > -Tim > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of [email protected] > Sent: Tuesday, June 01, 2010 9:16 AM > To: [email protected] > Subject: [FlexEdge] VOX ? > > Hi, > > I am trying to use VOX with the latest 2.0.0 beta. However I have never > tried > using VOX before, and I may not understand how to set it up. > > 1. Under Setup - > Transmit I set the sensitivity to 200 and the delay > to 250. > When I talk the MOX button turns OFF between words. Raising the delay > higher - > up to 1000 (1 second), but it does not seem to help at all. I've lowered the > sensitivity, and that doesn't work either. This is using VAC with my > microphone. > > 2. Now, I'd really like to use VOX with VAC for an application program > that do > not have COM port PTT capability. This was supposed to be possible with > early > 1.18.x, but I am not sure how to setup PowerSDR to do it. > > Maybe someone can check if it works OK, and give me some advise? > > Howard > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
