I am not having any issues with VSPmanagr and Fldigi on any of the 2.x versions 
of PowerSDR 


-Tim

-----Original Message-----
From: David Beumer W0DHB [mailto:[email protected]] 
Sent: Saturday, July 03, 2010 8:32 PM
To: Tim Ellison; [email protected]
Subject: RE: [FlexEdge] PowerSDR 2.05 and com ports

Yes --- at least with DM780 and EasyPal ..
I also had to do similar gyrations with the PTT com port

-----Original Message-----
From: Tim Ellison [mailto:[email protected]]
Sent: Saturday, July 03, 2010 3:42 PM
To: David Beumer W0DHB; [email protected]
Subject: RE: [FlexEdge] PowerSDR 2.05 and com ports

Does it do it when DDUtil is not being used? 



-Tim

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of David Beumer W0DHB
Sent: Saturday, July 03, 2010 4:52 PM
To: [email protected]
Subject: [FlexEdge] PowerSDR 2.05 and com ports

I know I'm not supposed be using 2.0.5 with the 5000A, but .
I've noticed that I seem to frequently be losing CAT connectivity with DDUtil 
and other programs.
This does not occur on Beta 2.0
Also, when firing up 2.0.5, sometimes have to cycle a few times and/or toggle 
CAT off and on to get CAT connectivity Any others seen this ?

2.0.5 does have V/U changes and I've got one of those on order :-) -- does that 
count!


_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software development and experimentalist who are 
using alpha and beta versions of the software.


_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software development and experimentalist who are 
using alpha and beta versions of the software.

Reply via email to