Clay, With regard to the audio, set the mic meter to peak at -20 dB. There is a bug in the mic meter calibration that will be fixed soon. I have been getting great signal reports with that setting.
Gerald Gerald Youngblood, K5SDR President and CEO FlexRadio Systems(TM) 13091 Pond Springs Road, #250 Austin, TX 78729 Phone: 512-535-4713 Ext. 202 Email: [email protected] Web: www.flex-radio.com Tune In Excitement (TM) PowerSDR(TM) is a trademark of FlexRadio Systems On Sun, Jul 4, 2010 at 3:04 PM, Clay W7CE <[email protected]> wrote: > I've been playing with the 1500 on the air the last couple of days and have > received several reports that the power level is very low for the first > second of so of transmission and then is fine. I did some experiments > looking at the Panadapter and can see the transmitted audio level rise 6-10 > dB somewhere between 1/2 and 1 second after key down. Basically, to use the > radio I have to key the mic and then wait 1 second before talking. Anyone > else seeing this? > > Also, some of the audio reports have not been very favorable. I worked a > JA station on 20M this morning and a CA station broke in to tell me that the > audio was very distorted. The JA station agreed with him. The Mic level > was around -4 db at the time. > > I'm running PSDR 2.0.2 from the CD that was delivered with the radio. > > 73, > Clay W7CE > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
