Thanks Bob. I have no issue with things being so sensitive that we see things 
we would not normally see. I just like to know the source and explanation.

On another topic, after hooking the 1500 up to my 2m transverter I found what 
perhaps is an image? Here is a screen shot of PowerSDR console:

http://moon-bounce.com/satcom/satcom_files/1500_image.jpg

(the CW beacon is exactly the same in the lower signal level image at (144.283 
- 144.261) = ~22 KHz)

Here is a screen shot from SpectaVue with an SDR-IP showing same signal and the 
lack of the image:

http://moon-bounce.com/satcom/satcom_files/no_image.jpg

Anyway, I believe Tim said that wide band image rejection isn't working yet. 
Just wanted to confirm this is what I am seeing.

Thanks for the time and the great SDRs, i love my 5000 and look forward to 
getting my 1500 fully operational as IF radio for all my VHF+ transverters.

Joe
k6sat

On Jul 5, 2010, at 9:35 AM, Bob McGwier wrote:

> This is true because of the "proportional guidance" mechanism in sigma-delta 
> converter.
> 
> A better way to look at it, in my self serving, humble opinion, is that we 
> are both cursed and uplifted by our panadapter.  Its sensitivity is much too 
> great for HF and too low for VHF+.  We tried a one size fits all.  WE CAN 
> dither ourselves at all times on HF and cover up all these tiny spurs which 
> are of no signficance WHATSOEVER operationally.
> 
> The panadapter reveals things no other manufacturer would dare show you in 
> their radio but in these radios,  the performance greatly exceeds those of 
> competitors in this regard but we are cursed by showing even the tiniest 
> warts (like these spurs that are 100,000,000,000 lower in power than full 
> scale) and at the same time uplifted by how well it all works operationally 
> for those on HF.
> 
> While it is down my personal priority list,  before other things which impact 
> performance (such as redoing the metering,  turning the entire TX chain from 
> the outset into an RF chain and not a an AF chain in software, etc.) I want 
> to enhance the sensitivity of the displays for weak signal types (moonbounce, 
> etc.) and greatly enhance the available resolution for all at lower 
> computational cost.
> 
> Thanks for noticing and starting an interesting conversation.
> 
> Bob
> 
> 
> On 7/5/2010 10:53 AM, Gerald Youngblood wrote:
>> The band noise inherently provides the dithering.
>> 
>> Gerald
>> 
>> 
>> Gerald Youngblood, K5SDR
>> President and CEO
>> FlexRadio Systems(TM)
>> 13091 Pond Springs Road, #250
>> Austin, TX 78729
>> Phone: 512-535-4713 Ext. 202
>> Email: [email protected]
>> Web: www.flex-radio.com
>> 
>> Tune In Excitement (TM)
>> 
>> PowerSDR(TM) is a trademark of FlexRadio Systems
>> 
>> 
>> On Mon, Jul 5, 2010 at 9:47 AM, [email protected]<[email protected]>  wrote:
>> 
>>> Thank you Gerald for the explanation. Doesn't dithering remove this?
>>> 
>>> Ironically, I only hooked up the dummy load to run the levels calibration
>>> (per another post last week). Anyway, I will try it out on the air today
>>> (both HF and transverter).
>>> 
>>> Joe
>>> k6sat
>>> 
> 


_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software development and experimentalist who are 
using alpha and beta versions of the software.

Reply via email to