You will have no problems. Just tune with full power (~5 watts). -Tim -------- Sent from my iPhone
On Jul 16, 2010, at 9:44 PM, "Richard Allen" <[email protected]<mailto:[email protected]>> wrote: According to LDG; stay tuned. Begin forwarded message: From: "LDG Electronics Inc" <<mailto:[email protected]>[email protected]<mailto:[email protected]>> Date: July 16, 2010 6:56:59 PM CDT To: "'richard allen'" <<mailto:[email protected]>[email protected]<mailto:[email protected]>> Subject: RE: minimum tuning power Reply-To: <<mailto:[email protected]>[email protected]<mailto:[email protected]>> For the AT-100ProII, the radio must maintain at least 1 watt through the entire tuning process. I don't know if the Flex-1500 will do that or not. ________________________ LDG Electronics, Inc. 1445 Parran Road St. Leonard, MD 20685 Phone: 410-586-2177 <http://www.ldgelectronics.com>http://www.ldgelectronics.com <http://groups.yahoo.com/group/LDG-auto-tuners/>groups.yahoo.com/group/LDG-auto-tuners/<http://groups.yahoo.com/group/LDG-auto-tuners/> - - - - - - - - - - - - - - - - - - - - - - - -----Original Message----- From: richard allen [mailto:[email protected]] Sent: Friday, July 16, 2010 7:55 PM To: <mailto:[email protected]> <mailto:[email protected]> [email protected]<mailto:[email protected]> Subject: minimum tuning power Would you please tell me if your tuners will all tune at the minimum power shown in their specs? I just bought an at-100proII to use with my new flex-1500 (coming soon) and am hoping to tune at or slightly above the 1 Watt minimum power but certainly no more than 5 Watts. Thanks, Richard W5SXD _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
