OK, it just had me fooled because you can select SWR so I thought it was supposed to read.
Thanks. ----- Original Message ----- From: Brian Lloyd To: Gary Keating Cc: [email protected] Sent: Thursday, July 22, 2010 8:07 PM Subject: Re: [FlexEdge] 0.0 SWR reading on TX meter On Thu, Jul 22, 2010 at 9:01 PM, Gary Keating <[email protected]> wrote: I am using V2.0.0 Beta SVN: 3715, XP Pro 32 bit and a Flex-5000A. When I set the TX meter to SWR the reading is always 0.0:1 whether there is an antenna connected or not. The Fwd Pwr and Ref Pwr readings appear to work correctly. As an example: On 20M using Tune I see an SWR of 1.6 but when I transmit the SWR will only read 0.0:1 That is how it is supposed to work. SWR reading is only valid in 'tune'. Yes, I think that SWR should display in any continuous output mode but that is not how Flex has written the code. YMMV. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 [email protected] +1.767.617.1365 (Dominica) +1.931.492.6776 (USA) (+1.931.4.WB6RQN) _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
