if you set up your DXlabs system similar to what I've described
You can easily use it for N1MM contesting software also.
Either by having DDUT talk to both Commander via it's direct Com 5 link
and use DDUT to talk to N1MM by selecting DDUT RCP tab and assigning
RCP2 a comport that talks to N1MM's Rig control port.
In my case I use the VSPE Pair of com 20<>5
That allows me to tune PSDR vfos/mode and see it reflected in both
Commander and N1MM's rig control program
which again makes use of High/Low and N1MM only accepts com port numbers
in the range of 1 through 8
and I already have com 8 set as my PTT port so I don't have to make any
changes there.
This is all Black Magic, and 500 years ago, we would have been burned at
the stake for this kind of trickery.
--
---------------------------
Just follow my roots. I'll turnip somewhere!
---------------------------
Bill H. in Chicagoland
webcams at http://BIGDELL:8080
weather at http://hhweather.webhop.org
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
