Good questions. See my answers in-line below
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of richard allen Sent: Friday, November 12, 2010 5:02 PM To: [email protected] Subject: [FlexEdge] adding flex3000 Tim, I have my 1500 up and running with 2.0.16 on xp sp3. Works great! [Tim] Excellent I installed it for 1500 only to keep it simple. [Tim] OK. Do I need to reinstall to have both 3000 and 1500 or can I add the 3000 with no reinstall? [Tim] I think you will need to re-run the installer and select the modify option, as I have never testing a condition like this. Here is why. With the installation of the FLEX-x000 you conditionally will get the Firewire driver, if that versions is not already installed. You also get the aut.dll that adds the enhanced performance for the FLEX-3000 ATU. If the modify does not work, then I recommend that you run the installer and select the Remove option to uninstall PowerSDR v2.0.16 and then run the installer again, selecting the FLEX-1500 and the FLEX-5000/3000 as the radios. If you do this, it should *not* uninstall the Firewire or USB drivers. If I had installed for both would they both need to have been present at install time? [Tim] No. Matter of fact, you need to make sure all radios are powered off at the time of installation, so the installer doesn't actually know what radios you do or do not have attached. As a matter of practice, I install for all radios (the default) whether or not I plan to use those radio types on the PC I am installing the software on. Thanks, Richard W5SXD _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
