Drax, What is your Operating Mode set to in the FlexRadio driver?
Gerald Gerald Youngblood, K5SDR President and CEO FlexRadio Systems(TM) 13091 Pond Springs Road, #250 Austin, TX 78729 Phone: 512-535-4713 Ext. 202 Email: [email protected] Web: www.flexradio.com <http://www.flex-radio.com/> Tune In Excitement (TM) PowerSDR(TM) is a trademark of FlexRadio Systems On Sat, Nov 13, 2010 at 11:42 AM, Drax Felton <[email protected]> wrote: > > > After reading your previous email I did just that. > I tried to couple my new, better, driver with a 1024 sample rate for > digital > modes and ssb and ended up with audio distortion shortly thereafter. I > went > back to 2048 and have run continuously for another 24 hours without > incident. > I don't use CW. > > > > On Fri, Nov 12, 2010 at 10:24 PM, Jim Jannuzzo <[email protected]> wrote: > > Would you two gentlemen see if you can confirm the fix for raspy audio I > posted earlier? I tried all the 1394 drivers with no effect to raspy > audio. > Then I changed the DSP buffers from 2048 to 1024 for SSB and Digi. Raspy > audio went away for voice, digi, and CW through Digu. > However, if I listen to CW on CWU, with the DSP for CW remaing at 2048, CW > sucked. > I > This fix also cured my rheumatism. > Jim KJ2P > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
