Paul: There could be several sources of clicks or pops on the FLEX-1500. BUT, if they are not coming out the speaker jack on the 1500, then it does not sound like the pops are coming from either the PowerSDR software or the FLEX-1500 hardware.
I don't understand your reference to audio coming in to MixW over USB. Could you please describe your system, and in particular, what software is used to get the audio onto and off the USB cable you are referring to. Normally, I would expect MixW to be running on the same computer as PowerSDR, and those to be connected by VAC. No real cables, USB or otherwise need be involved. If that is what you mean, or VAC is involved in any way, then make sure you have the paid-for version of VAC, because the free version deliberately does inject noise bursts into the (virtual) cables as an inducement for you to buy the paid version. --- Graham / KE9H == On Tue, Nov 16, 2010 at 5:09 PM, <[email protected]> wrote: > Does anyone else have clicking audio with 2.0.16 with Flex 1500? It shows > up when coming over USB , but not from a direct connection from the Flex > 1500 phone jack to the laptop mic jack. In MixW it shows up as lines > across the waterfall at random intervals as shown at the link below. I > think 2.0.8 was clean with the setup over the USB -- at least it was > clickless, but I am clueless. (A little humor there) > > http://pws.prserv.net/blackledge/Flex.htm > > Paul W5PDB > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
