You need to download this document and read it first. http://support.flex-radio.com/Downloads.aspx?id=356
Then download the driver patch kit http://support.flex-radio.com/Downloads.aspx?id=355 Then do steps 1, 2, and 5 listed in the troubleshooting guide. There is a 99% chance that either steps 2 or 5 will resolve your problem. If not, then you can try 3, but there is a good chance y our BIOS does not have this setting. Doing Step 4 is optional and is usually not necessary unless you USB controller is really wacked out. If all else fails, then you need to contact FlexRadio Support (Dudley) so he can do a driver debug trace to see what is going on ([email protected]) -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Alfred Green Sent: Sunday, January 09, 2011 5:15 PM To: [email protected] Subject: [FlexEdge] Problem upgrading to 2.0.16 / F1500 Greetings, I have been running 2.0.5 since I got my 1500 last summer. It was working fine this morning, then I decided for some strange reason to upgrade to 2.0.16. I downloaded the update from the main Flex page, and followed the install instructions. PSDR starts up fine, but no indication of any receive activity. Signal meter shows -240dBm. Changing the antenna selection has no effect. I'm injecting -70dBm into the XVRX port from my HP8640, so I was expecting to see something. Virgin database, default settings of WWV, 10MHz LSB, 0db preamp. Changing mode has no effect, changing bands varies the signal reading as the preamp selection changes; at 30dB preamp the signal meter drops to -270dBm. Toshiba L505 laptop, i3 + 4GB, Win 7/64. Device Manager shows F1500 SDR driver 10.1.1.0, USB Kernel driver 10.2.1.0. The big problem is that I don't seem to have a way of going back to 2.0.5. I even uninstalled both drivers and downloaded 2.0.8 from the Flex page but that won't run either. Device Manager/ Other devices/ FLEX-1500 says "The drivers for this device are not installed. (Code 28)" I really would like to get this back in service driving my transverters before the Jan VHF contest. My F3K is at 1.18.6 on a different computer and is working wonderfully; I don't think I'll risk trying the Beta version on that one. Any comments / suggestions gratefully received. 73 Alf NU8I Scottsdale AZ DM43an _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
