Many thanks for all of the thoughts and ideas! The clock says "915" MHz for the frequency. Alas, the HT goes to 914.9875, then jumps to 944.000 NFM So far, have heard nothing on that frequency.
Am starting to move the boxes into the cold........ George K2CM ________________________________________ From: [email protected] [[email protected]] on behalf of Brian Lloyd [[email protected]] Sent: Thursday, February 10, 2011 11:53 AM To: [email protected] Cc: [email protected] Subject: Re: [FlexEdge] Off Topic - need help with a dilemma On Wed, Feb 9, 2011 at 9:05 PM, Ralph W5JGV <[email protected]> wrote: > > Now I know its in a box. I found the atomic-clock/thermometer > > and noticed that it shows an inside temperature of 70 degrees and > > an outside temperature of 65 degrees which means that the outside > > thermometer/transmitter is somewhere within 500 ft....but, all of > > the boxes in the house are within 500 ft. > Many of these devices actually transmit in the 70cm ham band at around 434 MHz. They use On-Off Keying (OOK - CW) to transmit data. Listen around that frequency to see if you can hear the transmission. You can then DF for the correct box. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 [email protected] +1.767.617.1365 (Dominica) +1.931.492.6776 (USA) (+1.931.4.WB6RQN) _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
