Quote: "Now, we have a release which seems to fix the issue according to a surprisingly few positive reports (no offense to the 10 or 15 people who have already posted positive reports on the installation and operation of 2.19 RC1)."
What I DON'T want to see are the usual quickdraw, "I installed 2.0.19 and the radio's perfect" reports that show up within hours of any release. In my case I used the new software to make 200 30-wpm contacts in the ARRL CW test that started hours after the release. I intentionally made at least ten Qs on each band, and ran some tests on six meters. (did ANYONE else try six CW?) I played with nearly every setting Flex offers. I looked for new bugs. I hooked up a dummy load when I thought I spotted an RF-caused problem. I tried several new databases and ultimately deleted all old Flex software and did a really clean install of 2.0.19, and without an antenna attached. Three days of playing with 2.0.19! My 5000 **SEEMS** to be working well except perhaps on six meters where the keying is a bit "thumpy." But I'm still not ready to publish my final opinion. Jeff K0OD _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
