Steve has entered it into Rally (the software development management system)
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bob McGwier Sent: Sunday, March 13, 2011 7:39 PM To: Steve Nance Cc: Flex Edge Subject: Re: [FlexEdge] v2.01.20 RC2 Problem - Loss of CW Transmit--further defined I ran into this today working 4A4A and found it quite aggravating. Good catch. I can confirm it. Bob On Sun, Mar 13, 2011 at 9:24 AM, Steve Nance <[email protected]> wrote: > Confirmed, definitely a defect. > > 73, Steve K5FR > > PSDR 2.0.20 RC2 > FW 2.0.14.2 > F5k (1810-2874) RX2 > XP SP3 > I7-940 3g > DDUtil 2.0.1.37 > DXLab (latest) > CWS 1.6 > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Dan & Jean > Sent: Saturday, March 12, 2011 9:53 PM > To: Flex Edge > Cc: [email protected] > Subject: [FlexEdge] v2.01.20 RC2 Problem - Loss of CW > Transmit--further defined > > A few days ago, I reported a problem with my 5000A where I would > occasionally lose the ability to transmit CW (sometimes frequently). > CW transmit could be restored by shutting down PSDR, and restarting. > > I can now reproduce this behavior, and it appears to be a bug. My > operating is mostly chasing DX on 160 through 10 meters, and mostly > CW. My antennas are non resonant on most bands, and I use a manual > Ten-Tec 238C tuner to match the output of the 5000A. > > The problem occurs when working SPLIT CW, and activating the TUN > button. The TUN operation works fine, but (after using the TUN button > when "SPLIT"), the ability to transmit CW is lost until I either: 1) > return to simplex, or 2) shut down and reload PSDR. > > My usual procedure after clicking on a "split" DX Spot (in DXLab) is > to drag the 5000A VFO "B" (transmit) marker to a clear spot on the > band, hit the 5000A TUN button, tune the Ten-Tec tuner, deactivate > TUN, and then reposition the VFO "B" marker to the planned transmit > frequency. This procedure worked fine on earlier releases of PSDR, but > does not work now (at least for me). > > Obviously, now that I understand the circumstances which trigger the > behavior, I can work around it (and enjoy the otherwise magnificent > performance of this PSDR release). > > 73, > Dan - W4TQ > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
