See my comments below
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Larry Otto Sent: Tuesday, March 22, 2011 4:21 PM To: [email protected] Subject: [FlexEdge] issues F5K V.20 RC2 Win7 - 32 bit Neal's Special Computer Hello All : 1.After Transmitting, on occasion, the rig will not return to receive. After quickly clicking the mic, then it will return to normal. This only happened once in a while, but I notice that it is happening more frequently. Only noticed it on V.20 RC2 [Tim] It is a bug. The internal beta tester group has been testing several fixes for it. It appears to be fixed for the next release. 2. No RF out when going from Tune to full Transmit Power, while in split mode. If I return to simplex, then back to split without hitting the tune button, all is normal. This also only started with V.20 RC2. [Tim] It is a bug. The internal beta tester group has been testing several fixes for it too. It also appears to be fixed for the next release. 3. Last but not least, when using the MultiRX, I get very little audio from the secondary signal, i.e. pile up signals. This has been evident for me from day one. [Tim] Interesting. Does it do it with different speaker/headphone combinations? Also make sure the gain sliders are all the way up and the pan controls are each panned; one full left and the other full right. With the sliders configured as described, I get fully separated and equal audio in each speaker from each MultiRX receiver. I understand #1 & #2 are being worked on, but haven't heard of anyone else with this audio problem. Any ideas? 73 Larry W8LO _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
