You do not need the ISO for a CD. You need to uninstall 2.0.22 by re-running the installer and selecting the REMOVE option or you can use the Windows control panel method. I would also uninstall the Firewire driver using the Control panel method (look for FlexRadio 3.5.5.10185) before re-installing it using the download link. Reboot when you are done.
http://support.flexradio.com/Downloads.aspx?id=363 Make sure the radio is turned off and you are using a full administrator account credential when installing the software. If that does not work, contact Dudley at FlexRadio support for your initial setup issues. -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Vandenberg Sent: Friday, April 15, 2011 7:34 PM To: [email protected]; [email protected]; John Vandenberg Subject: [FlexEdge] FLEX-VU5K problems Just got the radio back from the UHF/VHF upgrade and running into problems. The supplied CD (V2.0.22) failed to install properly. It went ahead to installed a USB driver without waiting for me to select the proper F5K setting. I tried this on a second system (both Win7, one 32 and one 64 bit) with the same problems. I tried several times. After uninstalling the drivers and all versions of PWSDR I tried again with same results. Question: were can I find the distro ISO for creating a new new VU install CD? I have also tried the FLEX PSDR-V2.0.22-suite. It installed but not everything that worked before on the F5K works now. I hope the new install setup disk will address these problems. - The most obvious is power out. It will not put out anymore then 40W on HF. - panadapter on VHF looks goofy, is very slow etc. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
