The FM audio/Squelch problem is a known issue that will be fixed in the next version of PowerSDR 2.1.x
-Tim ----- W4TME -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steve Potter Sent: Tuesday, May 31, 2011 10:34 AM To: [email protected] Subject: [FlexEdge] No Audio on FM Have problems with squelch on FM Using a Flex-1500 (new addition to the shack here), RC1 v2.1, 6 core 6Gb ram PC system Initially I could get no audio out on FM, and had toi attempt to listen on AM or DSB After changing the squelch from 100 on DSB to a lower level, I switched back to FM and audio came on and the squelch worked To replicate; Select dsb, set squelch to 100 (default setting) Select FM - no audio and no apparent change when squelch is changed Select DSB, change squelch to a lower level within the 'green' audio dignal Select FM and squelch works Also I noticed if you select RX only in the XVTR section, you cannot change the FM deviation, whilst logical, the deviation filter width is used on RX, and should be changed depending which VFH or UHF band is being used even if you use RX converters and don't wish to transmit Regards Steve G6HOQ Flex 3000 & 1500 . _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
