See my comment below
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Don Sent: Friday, June 03, 2011 9:46 AM To: [FlexEdge] Subject: Re: [FlexEdge] FlexControl Stu Thank you. So since I have hardware ports of com 1-3 it "should" assign com 4. With my first VSP port starting at com 7, I just might get away with it. [Tim] You will get away with it. It mostly conflicts when the VSP manager ports are below 6. I have connected the FC to several USB controllers and I always get assigned com4 In any case resetting the com ports is not that big of deal, yes a pain maybe, but not serious. Besides I take screen shots of all my settings. It makes setting up a new version a lot easier, I don't have to remember them all. Enjoy the day and have a great weekend. Don kd6hq Don, I haven't seen the errata sheet but there are NO issues with operating the FlexControl with either VSP Manager and/or the Eltima Serial to Ethernet bridge - I am using both. I believe the errata sheet provided a recommended installation procedure in order to avoid a possible collision between the Windows hardware wizard and the underlying drivers used by VSP Manager. Specifically, the Windows HW Wizard will assign the first available COM port which is not already registered to the system as a HARDWARE port, to the FlexContol when it is first installed. Stu K6TU _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
